Bosch EDC16....

by **Relic** » Tue Aug 07, 2012 10:44 pm

Thought it would be good to have a sticky list.
So I will start the ball rolling with what I know.
Please amend and extend as required.....

RPM (factor 1 offset 0)
Duration microsecond (factor 1 offset 0)
Air pressure millibar (factor 1 offset 0)
Fuel Pressure bar (factor 0.1 offset 0)
Torque NM (factor 0.1 offset 0)
Mass Air flow mg/stroke (factor 0.1 offset 0)
Mass Fuel flow mg/stroke (factor 0.01 offset 0) ...sometimes volume fuel flow mm3/stroke
Speed km/h (factor 0.01 offset 0)
Pedal Percent (factor 0.012207 offset 0) ...based on 8192 = 100%
Crankshaft Degrees (factor 0.023437 offset 0) ....no idea why this obscure factor is used.
Temperature Kelvin (factor 0.1 offset 0) ...as centigrade use (factor 0.1 offset 273.1)

by **adriancl** » Fri Oct 19, 2012 8:34 am

Good and helpful your post.

by **biela** » Mon Nov 05, 2012 12:27 am

Maybe we could add Lambda and N75:

Lambda (factor 0.001 offset 0)
Duty cycle or N75 (factor 0.012207 offset 0)

by **Relic** » Tue Nov 06, 2012 12:36 am

Yep....forgot those :clap:

RPM (factor 1 offset 0)
Duration microsecond (factor 1 offset 0)
Air pressure millibar (factor 1 offset 0)
Fuel Pressure bar (factor 0.1 offset 0)
Torque NM (factor 0.1 offset 0)
Mass Air flow mg/stroke (factor 0.1 offset 0)
Mass Fuel flow mg/stroke (factor 0.01 offset 0) ...sometimes volume fuel flow mm3/stroke
Speed km/h (factor 0.01 offset 0)
Pedal Percent (factor 0.012207 offset 0) ...based on 8192 = 100%
Crankshaft Degrees (factor 0.023437 offset 0) ....no idea why this obscure factor is used.
Temperature Kelvin (factor 0.1 offset 0) ...as centigrade use (factor 0.1 offset 273.1)
Lambda (factor 0.001 offset 0)
Duty cycle or N75 (factor 0.012207 offset 0)

by **avacalho** » Wed Nov 14, 2012 6:26 pm

Whow big thank you for this!!

by **zotto** » Mon Dec 10, 2012 10:40 am

great post! thank you

by **ducdriver** » Thu Mar 14, 2013 6:06 pm

Thanks from me - that is , what i need :D

by **tagar** » Sun Mar 17, 2013 9:31 am

a very good information on EDC16

by **Relic** » Sun Mar 17, 2013 11:52 am

RPM (factor 1 offset 0)
Duration microsecond (factor 1 offset 0)
Air pressure millibar (factor 1 offset 0)
Fuel Pressure bar (factor 0.1 offset 0)
Torque NM (factor 0.1 offset 0)
Mass Air flow mg/stroke (factor 0.1 offset 0)
Mass Fuel flow mg/stroke (factor 0.01 offset 0) ...sometimes volume fuel flow mm3/stroke
Speed km/h (factor 0.01 offset 0)
Pedal Percent (factor 0.012207 offset 0) ...based on 8192 = 100%
Crankshaft Degrees (factor 0.023437 offset 0) ....no idea why this obscure factor is used.
Temperature Kelvin (factor 0.1 offset 0) ...as centigrade use (factor 0.1 offset 273.1)
Lambda (factor 0.001 offset 0)
Duty cycle or N75 (factor 0.012207 offset 0)
Sensor mVolt (factor 4.888 offset 0)