launch control for jtd 8v edc15c7

by **mladenke** » Mon Dec 15, 2014 5:43 pm

yes :angel:

by **bsjtd_gt** » Mon Dec 15, 2014 8:10 pm

mladenke wrote:yes :angel:

help to do it please it would be a great improve to my file best regards

by **Mahoney** » Mon Dec 15, 2014 9:20 pm

Ajd objasni to malo ako ti nije sta :lol:

by **mladenke** » Mon Dec 15, 2014 10:58 pm

you need:
torque limit for 1. gear
1. gear upper and lower window rear ratio
2. gear lower windows gear ratio

limit 1. gear torque limit @rpm that you whant to be LC
change gear ratio for first and second gear, and ecu will think that you in 2. gear, from 20km/h

nadjes lower gear ratio za 2. brzinu, i smanjis da ecu registruje brzinu vozila kao da si u drugoj brzini a ti si ustvari u prvoj. limitiras torque limit prve brzine na zeljeni rpm na koji zelis da ti bude LC. ukratko

by **Mahoney** » Tue Dec 16, 2014 4:04 pm

Hvala,cim rijesim MAF probati cu to,tj ako rijesim MAF :lol:

by **bsjtd_gt** » Wed Dec 17, 2014 12:22 pm

Mahoney wrote:Hvala,cim rijesim MAF probati cu to,tj ako rijesim MAF :lol:

english would be great mate

by **bsjtd_gt** » Wed Dec 17, 2014 12:31 pm

about torque limiter for shifts i don't think my ECU have it or i can not find it what is not a surprise for me, so i'll be looking for it but information on maps for this ECU is not so great and help goes the same poor way
best regards

by **ecuedit** » Thu Dec 18, 2014 10:34 pm

bsjtd_gt wrote:about torque limiter for shifts i don't think my ECU have it or i can not find it what is not a surprise for me, so i'll be looking for it but information on maps for this ECU is not so great and help goes the same poor way
best regards

I would not agree with this statement completely.
There is damos for this ecu on our forum - damos is all you need...Alfa and Hyundai damos...both are very very similar.

You just look for:
fgwGANG
BEG torque

you see the maps and you find it in your binary. Once when you open damos you can do it very fast.
Pictures of how you filter maps is attached...

by **bsjtd_gt** » Fri Dec 19, 2014 9:28 pm

ecuedit wrote:
bsjtd_gt wrote:about torque limiter for shifts i don't think my ECU have it or i can not find it what is not a surprise for me, so i'll be looking for it but information on maps for this ECU is not so great and help goes the same poor way
best regards

I would not agree with this statement completely.
There is damos for this ecu on our forum - damos is all you need...Alfa and Hyundai damos...both are very very similar.

You just look for:
fgwGANG
BEG torque

you see the maps and you find it in your binary. Once when you open damos you can do it very fast.
Pictures of how you filter maps is attached...

sorry about the statement there is much information on this ECU but not damos to these more advanced stuff
excuse me but i think you are talking about edc15c7 and i am talking about edc15c5 and the damos for it by the way if you say it is here damos for EDC15C5 Fiat commonrail version 1 please point me in the wright way to have it

by **ecuedit** » Thu Dec 25, 2014 9:32 pm

Need to add new post here. I suggest new topic.

Last 3 replys were removed due to mistake 2 unneded:

Need to confirm bsjtd_gt statement EDG15C5 and EDC15C5 have no major similarity and that Smart uses EDG not EDC.

As what can help you is most of EDC15 generation ECUs for finding proper maps by using damoses.

bsjtd_gt thanx for making a point. :thumbup: