Hi all,
I read some part of the topics contained in this site that is beautiful ecuedit.com.
After that I started in reprogramming using WinOLS, following numerous tips that you put on different topic.
To come to the point I made about as a VW Polo 1.4 TDI 75Hp 2000. I would like to have your opinion on the maps that I could find, tell me if they are correct and correct any errors. And can you help me find the SVBL please?

Thank you in advance

SVBL-51B96,71B96-dec. value 2100,hex value 834.
Look for SVBL value before 32043,when the line goes down.(First value before 32043 ,16bit)You have Search function in Winols.
Look here:

Adriancl thank you for this valuable information.
Can you tell me the way, if I am not mistaken about the maps I found please.

Not believe everyone over there?

Little help ;)

kinetic wrote:Little help ;)

WinOLS (VW Polo 1.4TDI 75cv (Original) - 354620).rar

Kinetic thank you very much. I take a look over. :thumbup:

Hello Kinetic
You've been a great help and I thank you again. However I have a question about the "timing lim" and "SOI". Can you tell me what it is and what it is used please?

SOI or BOI = Start Of Injection or Beginning Of Injection. At this moment the injector start to open and injects fuel in the cilinder.

Exactly. If you apply factor -0.023437 offset 78 u can see angle BTDC for high IQ´s.

kinetic wrote:Exactly. If you apply factor -0.023437 offset 78 u can see angle BTDC for high IQ´s.

This is also valid for hdi and other diesel engine?