easydiag wrote:hi,
first you don't need galetto to read this ECU , you need an other flash programmer such superpro , beeprog.....etc.
then read the secand hand ecu we will make immo off for you, or give you immo off ready to start your car.

Hi mate,
I have my Donor Ecu read whit a eprom programmer, and made it immo off with Immo Universal Decoding 3.2. ( cut pin 58 version) but car dont start. I have heard the fuel pump before programming Donor Ecu, but Car had no spark ignition, after programming I dont hear fuel pump.
immoboliser systeem block only fuel pump or spark ignition too ???

siemens has 2 versions sirius 32 , with and wihtout Can.
with can version should work with an emulator( read on google). I think I need a emulator.
How can I see my car with or without Can is ?
can I check it via the OBD2 plug?
like here
http://forums.pelicanparts.com/uploads2/OBDII%20port1070929671.jpg
my car have pins on :
1 -4-5-6(CAN-H) -7(K-line)
14(CAN-L) -15-16

thank you
and here is the ori.file of Donor Ecu

For this type of ecu to make virgin (autosync) you must make 4000-7fff all FF FF but if you want to make immo off you must use winols and brain.exe

finally successfully !!! Clio start and drive perfectly,,,Problem is Solved :thumbup: you make daily ECU immo off..I started with a total of zero,,
therefore it is very important for me ..I'm working on for weeks..
finally Patience is the winner..thank you very much to everyone who has helped

Solution :
I read my donor ecu with eprom programmer( desoldering)..and edit it with
Immo Univesal Decoder V3.2 ( ecuvonix). cut Pin 58
What I find strange is red led first kept blinking ,, after the 2nd start led was totally out,

Thanks again