BMW E46 320D 136hp edc15 maps 0281001445

by **BlackFlash** » Thu May 07, 2015 9:20 pm

juice wrote:Yea, for automatic, edit both maps for every characteristic (toque,driverwish etc)

What do you mean? For every parameter i must found 2 maps? DW - 2 maps, Torque limit - 2 maps. ok... but SOI ? EGR? Other maps?

juice wrote:Original boost is 2100, is not stock your file then.

My stock map are from DIS. I programm ECU when change MAF.

juice wrote:Boost should look like this : request for example 2350 , limit by atmosphere 2400 and svbl 2400.

Could you help with foun SVBL ? I didn't find it... Or it's in the end of Boost Limit map ?

Thanx for help and description of changes. I'll try to change my map, and than show it.

by **juice** » Fri May 08, 2015 6:43 am

Search alue 2250 exactly after boost maps i think or near the boost maps.
Yes for every paramters are 2 maps, one manual one for automatic.
SOI and EGR are general as i know, for SOI add 1 degree to last 1-2 columns, will not make big difference, our vp44 pump has own internal ecu which controls advance and fueling .
I saw moded map to 2400 mbar, your moded file not original, thats why i said is too much boost.

by **BlackFlash** » Fri May 08, 2015 7:29 pm

I'm just tried to modify my file. I use example from another file.

Could you look at the mod, and say something? :)
What i missed, or doing wrong?

WinOLS (BMW E46 136hp Modification (165)).bin

by **nikolaresen** » Sun May 10, 2015 7:51 pm

Would be a problem if I copy maps from tuned file from car with automatic transmission into original file with manual transmission?

by **juice** » Sun May 10, 2015 8:11 pm

If you copy just the maps, will not be a problem, but why from automatic?
There are a lot of good tuned files on this forum, for manual bmw 320d.

by **BlackFlash** » Sun Jun 21, 2015 9:41 am

Hello!
Could you help define this maps?
BMW EDC15 e46 320d 136hp (7786887) Original.

1.
http://b8.icdn.ru/b/blackflash/5/43637765Xwr.jpg
http://b8.icdn.ru/b/blackflash/6/43637766ISr.jpg

2.
http://b8.icdn.ru/b/blackflash/7/43637767pUG.jpg

3.
http://b8.icdn.ru/b/blackflash/8/43637768bdU.jpg
http://b8.icdn.ru/b/blackflash/9/43637769gzl.jpg

4.
http://b8.icdn.ru/b/blackflash/0/43637770vHK.jpg
http://b8.icdn.ru/b/blackflash/1/43637771knk.jpg

by **juice** » Sun Jun 21, 2015 5:54 pm

First map i was always very curious what is it but i tryed to increse/decrease values, no behavior change.
Second map which looks like torque limiter, same shit, edited, no change.
Third map is something rpm vs pressure, some calibration map, i think dont need to touch.
And last one..really dont know

by **BlackFlash** » Thu Jul 30, 2015 6:19 am

Good day for all! :)

Does anyone known about map for idle ? How it looks or where is it ?

My friends has 2 problems - high idle rpm. One - from increased plungers & injectors, and one from problem with VP44 :)))

by **rabb** » Sun Aug 02, 2015 11:09 pm

I need to delet my ews. Some one knows the adress do edit ?
Or does have a bin file fore me.

by **BlackFlash** » Tue Aug 04, 2015 3:41 pm

BlackFlash wrote:Good day for all! :)
Does anyone known about map for idle ? How it looks or where is it ?

So, i find one linear "map" in my dump... Temperature Scale and RPMs... But i'm confused in measures. Temperatures are -10C and +30C... RPMs for it are 1250 and 780... Only 2 points. Does ECU interpolate other parameters ?
780 rpm is a normal idle speed for my engine...

Does it right map? Or i need found smth else? I can't check it now on my car...