Hi,

I'm looking in this file for EGR switch, where Can i Find it?

Best regards

DrV wrote:Hi,

I'm looking in this file for EGR switch, where Can i Find it?

Best regards

there is 8bit switch at 1CAC4E in your file (there is number 2 - put it to 0),
with this switch you need to disconnect EGR plug connector no need to touch any other maps...
this is only method for full egr disconnection without touching any hysteresis or error codes...

Hello ecuedit , this switch is tested there. I did not know that the EDC 16 can be a key decision. Forgive my ignorance

stanislav georgiev wrote:Hello ecuedit , this switch is tested there. I did not know that the EDC 16 can be a key decision. Forgive my ignorance

yes - tested. You can switch off egr by changing that value number "2" to number "0" it is EGR internal diagnostic switch and you have to disconnect EGR plug. I use this switch on more than 100 cars that come with EGR electric fault, so i turn that switch off and thats it.

hysteresis and dtc combinations on this ecus result to limp in case of electrical issues in 80% of cases...so this switch is proper switch.
I found it in damos 2 years ago...and using it since than.

Value ID: EGRCD_numDia_C
Naming: Application parameter for EGR actuator diagnostic signal

Thanks ecuedit , you're a great guy. In what other car brands have found the key

stanislav georgiev wrote:Thanks ecuedit , you're a great guy. In what other car brands have found the key

almost all of them have a switch... ;)

Thank ecuedit, found the key in several different file

stanislav georgiev wrote:Thank ecuedit, found the key in several different file

you are welcome.

Hello ecuedit there key in this file. I tried to find it but no success

stanislav georgiev wrote:Hello ecuedit there key in this file. I tried to find it but no success

this is not same ecu and it is not fiat/alfa/lancia or suzuki... :P need to look another string.