launch control for jtd 8v edc15c7

by **Deman** » Mon Aug 24, 2015 1:05 pm

I think that one gear is necessary to set a minimum the display value, 1st gear upper limit 1st gear lower limit, Limit between 1st and 2nd gear below <0.001.
A value of 2nd gear lower limit to set as the 1st gear lower limit, or even less.

by **michass** » Mon Aug 24, 2015 8:55 pm

Can you give factor, offset of this gear ratios, i wonder, how it looks in 16bit 255 LoHi format.
It shoud be easier to find those values.

by **vladky88** » Tue Aug 25, 2015 12:09 am

Dumpscreen of values, blue ones right to 00700 repeatly numbers.

by **munro** » Tue Dec 08, 2015 10:22 am

ok I tried to activate the launch in this attached file (there is also the off maf) is working the problem it is that now limit the rpm ago with all gears do not understand ... can you help me?

by **etecuprom** » Wed Dec 23, 2015 6:33 pm

hi can test it ? i am not sure
best regards :thumbup:

by **Deman** » Thu Dec 24, 2015 1:29 pm

Why have you shifted gears rooms? Zero is there already. "V / N 2nd gear-window upper limit" you made less than "Limit between 1st and 2nd gear-Winds" and less than "V / N 2nd gear-window lower limit."

by **etecuprom** » Thu Dec 24, 2015 3:33 pm

ok check it ..if i have understand
upper and lower 1st gear i put 0
the value original for the 1st gear put in upper and lower of 2st gear
and don t touch limit between 1st and 2st window..