Hello.
I remapped my original File. Can you check this please? What I can do better?

Thanks

Its a poor remap..
DW = 75 is very hi, 72 is the ideal..
smoke limiter unchange
Target boost 1.5 is enough
if you want power you must change Durations 00 01 02 (start at 35mg to 55 and 2000 rpm to the end adding 2
degrees..

Thanks.

What you mean with target boost 1.5 is enough? Can you explain this?


How i switch the duration maps? How I can calculated them?

Should i add addresses of mg/stroke(my addresses end with 55-60) in target boost and duration maps?

you requested above 1.5 bar of boost.. 1.5 is the ideal..
try to use vagedc suite is very good program and is a good tool for beginers

xaparrix wrote:if you want power you must change Durations 00 01 02 (start at 35mg to 55 and 2000 rpm to the end adding 2
degrees..

Why to 55,not for 72 or 75?
Can you explain?

In durations add 2 degrees more ? (from 35mg/stroke at 2000RPM)?

From 2000 rpm to end,
But why for 55mg, not to end?

Here my new File. Please check it.