Corsa C 1.0 Z10EX

by **sepu33** » Thu Oct 25, 2012 10:42 pm

Can anyone help me get this ecu maps?
I do not have driver ecm.

The original file and hw/sw information in this post http://www.ecuedit.com/corsa-c-1-0-z10ex-t539

Regards.

by **adriancl** » Sun Oct 28, 2012 8:14 pm

At this engine can not earn more than 4-5HP.My wife has the same car,I've made changes on file but there is only a very small difference.Move a little better but mpg increased slightly.
Inj. map 10CAC -14x16.
Spark adv. 11292-11x16

by **sepu33** » Sat Nov 24, 2012 6:06 pm

Hi Sorry I answered before, I will try to make any changes there if I get something.
Could you tell me the changes you made?
One is to have a starting point.

Thanks for your help.

by **adriancl** » Mon Nov 26, 2012 8:26 pm

You can find a good start here:
chip-tuning-gasoline-cars-t127

by **mexanico1971** » Sun Dec 02, 2012 4:43 am

I made one corsa B 1.4 8v from 1992 and it get very nice !
better economy and the owner say that the 5ª gear look like the 3th before !
you got to get a wirebanb or opcom to see if the values of AFR are lower and something to see if are some pre-detonacion
you can set the rev cut till 7000rpm
is not easy to get power on that car, but in the end of 4 or 5 mod"s you ill get there !
make shore you dont advance more than 12º degress at first !

by **adriancl** » Sun Dec 02, 2012 10:38 am

You're right about Corsa B-EURO 2, but Corsa C-engine Z10XE-is EURO 4.
I think 7degr. for spark advance is safe for this engine.Over this value you need to watch the knock sensor.