Evening all.

I've got a 2001 Merc Vito 2.2CDi which has a Bosch ECU. (UK) .

Using my software I have a choice of scanning for a "CDi EDC15c5 EPROM 29F400" or a "Common Rail EDC15c6".

Not, I'd normally say its an easy choice but its a CDi engine (so I'd choose the first one logically), but then the sticker says CR which makes me think it could be the Common Rail.

I don't want to try and read the ECU and end up bricking it so I thought I'd ask.

I have a picture of the sticker if that's any good?

Thanks in advance.
Dave

Line one and two off the sticker...

Mercedes P/N A 611 153 72 79

Q07 ED6036 CR1.7 2.2L 4ZYL MQ3+MS5/MF8

If I tell you what I'm trying to do it might help...

I'm trying to pull the standard map off my ECU so I can look at it.

I've been told by a guy that's a bit of a MB expert that the 2002MY Mercedes CLK220 AMG map will upload to my ECU and run perfect.
I know the 2.2 engine is exactly the same, and so is the turbo.

It should make about 150ish whp which would be nice and it will be good to put an OEM map on rather than me play with maps.

Thanks.
D