Nissan Terano 2.7 tdi 125 HP 1998y turbo maps

by **krzysdro** » Wed Jan 13, 2016 8:06 pm

Hey , if anyone of you help me find maps " required pressure turbo" ?
Thank you
Kris

by **ecuedit** » Wed Jan 13, 2016 8:48 pm

krzysdro wrote:Hey , if anyone of you help me find maps " required pressure turbo" ?
Thank you
Kris

hello,
if i remember properly this turbo is not ECU regulated,
it is pure mechanic self regulated, check out the picture attached. but if you are planning to install VNT turbo,
than you might have a little problem ;)

by **krzysdro** » Wed Jan 13, 2016 9:46 pm

Yes, you're right , the turbo is self-regulation . Is it because there is no map required pressure turbo ?
It is the customer's car . I'll have it in a few days . Do you know for sure whether the car is EDC15C2 ? Because I'm not sure.

Kris

by **krzysdro** » Wed Jan 13, 2016 9:47 pm

ecuedit wrote:
krzysdro wrote:Hey , if anyone of you help me find maps " required pressure turbo" ?
Thank you
Kris

hello,
if i remember properly this turbo is not ECU regulated,
it is pure mechanic self regulated, check out the picture attached. but if you are planning to install VNT turbo,
than you might have a little problem ;)

Yes, you're right , the turbo is self-regulation . Is it because there is no map required pressure turbo ?
It is the customer's car . I'll have it in a few days . Do you know for sure whether the car is EDC15C2 ? Because I'm not sure.

Kris

by **ecuedit** » Thu Jan 14, 2016 10:46 am

if you take a look at the text values inside your flash, you will find out this signature:
TSW V2.10 261099 2814 EDC15VMP ;)

by **krzysdro** » Thu Jan 14, 2016 12:45 pm

I have Kess v2 and MPPS , but I can not program the ECU with these tools .
I have a programmer Vellon but he does not have checksums.
Do you count for me checksums if I do remap ?
Or maybe you have the pinout of the ECU for programming . Is this the car has an OBD or no ?

Thank you
Kris

by **ecuedit** » Thu Jan 14, 2016 1:02 pm

yes, i can calculate you the checksum. desolder flash and read it, make modifications and i can correct it, but i won't have time to look at your modifications.

by **krzysdro** » Thu Jan 14, 2016 1:21 pm

ecuedit wrote:yes, i can calculate you the checksum. desolder flash and read it, make modifications and i can correct it, but i won't have time to look at your modifications.

Thank you for all your help , you are very helpful.
At which point the car is ECU ? In the engine compartment ?

Kris