I have an alh originally from an auto, I have a set of injectors out of a manual car that i just did an engine swap on.
If I swap them into my engine do I multiply or divide by 1.21 to adjust my voltage map.

I got this from my search, but this was adding a pump to a car that originally had a 10mm pump. do i do the same if my car came with the 11mm

"The voltage map for 184+11mm is pretty much just edit the X axis (IQ) up 21% on each value. That's what I did for 205s (AFN 205 voltage map) and 11mm pump. Worked perfect for me.
To be clear, only edit the mg/stroke value. Don't adjust the voltage itself."


this is my voltage map at 780F8
[img=http://s10.postimg.org/cjv45yo5h/orig.jpg]

So I went and multiplied by 1.21 does this look ok?

Im scared to try it in the car without one of you ecu guru's input
here is a picture of the updated map
Any help is greatly appreciated
Thank you

[img=http://s15.postimg.org/nr10q0rk7/mutiply1_21.jpg]