Hi all,
Here is Dyno test for R53 ,HW mods-cold intake,17%pulley and 380cmc injectors from R53 JCW.SW also moded.
Car run great,have tested car with stock file, and mod file, big difference,but result on Dyno say something else.
I'm intrigued by AFR results.I guess it is possible to have a damaged throttle.
Test with 172HP is made with water cooled intercooler.
Test for 155HP is made in normal condition.
Car have stock 161HP(theoretical )but not tested on Dyno.,but tested from 0-60mph is under 7sec.(on specs is 6,7sec.).
Any feedback will be welcome.

Hi,

Can i ask, did you tune this file yourself, or was it tuned prior?

Did you scale in the 380cc JCW injectors, or start with a JCW map?

Thanks

alih369 wrote:Hi,

Can i ask, did you tune this file yourself, or was it tuned prior?

Did you scale in the 380cc JCW injectors, or start with a JCW map?

Thanks

I agree

TheDECODER wrote:
I agree

Hi mate,
Agree with what???
Car was not tuned, only sw rescale for 380cc injectors.But maybe not the best result because run too rich on WOT,run under 11AFR, , that's all.