EDC16C31 1037396107 XDF

Post ECU Damos, Mappacks & A2L here. Please specify attachment data.

Return to Damos, Mappacks & A2L

Re: EDC16C31 1037396107 XDF

Postby franz727272 » Wed Dec 12, 2012 4:58 pm

Relic wrote:
franz727272 wrote:What does it mean CEL? :?

Anyway can you update your XDF with the other histeresis map :thumbup:
Now that I have more oxigen to burn I would like to adapt a bit 'of diesel mg./str
How to calculate? Which map can 'give me more fuel to adapt the EGR setting? :geek:



CEL = CHECK ENGINE LIGHT

The other hysterisis map ? you mean the one which we dont know the function for ? or the EGR hysterisis.

Engine load% map has to be increased (mg/str) and main 25x1 TL has to match it (NM x6 = mg)
All other Torque Limiters have to be raised if they are lower and should be at least +6nm (1mg) above main TL.

Lambda map will probably limit fueling 1st.


[Yes you have fixed the 25 axes length values that were missing in the map.
WHY HAVE YOU SET THE HYSTERISIS VALUES AT 0 ??????]

OK THX relic

I set value on 0 and HDS log. you can see what appenns (see my log please)
I have seen many other mod from Italian tuner made in this way, so I think that should be fine mod in the same way.

About the xdf I have your old version with only the 2 histeresis map address but I think that are 4 maps. :|

franz727272
Silver
 
Posts: 84
Joined: Sat Aug 25, 2012 12:00 am
Location: rome italy

Re: EDC16C31 1037396107 XDF

Postby Relic » Thu Dec 13, 2012 8:34 pm

...dont use boost hysterisis.
You do not have permissions to view the files yet. You have to be registered and you have to make at least 3 quality / unique posts.

Relic
Diamond
 
Posts: 410
Joined: Mon Aug 06, 2012 3:18 pm
Location: England

Re: EDC16C31 1037396107 XDF

Postby franz727272 » Fri Dec 14, 2012 10:45 am

Relic wrote:...dont use boost hysterisis.

Ok I dont :mrgreen:

Why egr hysterisis table 2 on xdf 24 are all to 0 is modded before the file inside?


THX big work :thumbup:

PS. Why no one talks to us of civic mod...we are alone :|

franz727272
Silver
 
Posts: 84
Joined: Sat Aug 25, 2012 12:00 am
Location: rome italy

Re: EDC16C31 1037396107 XDF

Postby Relic » Fri Dec 14, 2012 11:57 am

??? is 0. :wtf:

Attached is OEM EGR hysterisis on mine.
I assume for EGR duty% 1 and EGR duty% 2.
EGR switches off above High value.
EGR switches on again below low value.
You do not have permissions to view the files yet. You have to be registered and you have to make at least 3 quality / unique posts.

Relic
Diamond
 
Posts: 410
Joined: Mon Aug 06, 2012 3:18 pm
Location: England

Re: EDC16C31 1037396107 XDF

Postby franz727272 » Sat Dec 15, 2012 12:11 am

Relic wrote:??? is 0. :wtf:

Attached is OEM EGR hysterisis on mine.
I assume for EGR duty% 1 and EGR duty% 2.
EGR switches off above High value.
EGR switches on again below low value.


Tuner pro keep in memory my modded sw. so xdf shoow me 0 :D

So do you think that is better try to set upper table to -1 and low to -2 :?

franz727272
Silver
 
Posts: 84
Joined: Sat Aug 25, 2012 12:00 am
Location: rome italy

Re: EDC16C31 1037396107 XDF

Postby Relic » Sat Dec 15, 2012 12:25 am

franz727272 wrote:
Relic wrote:??? is 0. :wtf:

Attached is OEM EGR hysterisis on mine.
I assume for EGR duty% 1 and EGR duty% 2.
EGR switches off above High value.
EGR switches on again below low value.


Tuner pro keep in memory my modded sw. so xdf shoow me 0 :D

So do you think that is better try to set upper table to -1 and low to -2 :?


I am sure Honda have a reason for doing it ;) :wave:

Boost Hysterisis looks like it was correct for table 2.
Over 6000 samples.
mg vs rpm = openloop or feedback
:thumbup:
You do not have permissions to view the files yet. You have to be registered and you have to make at least 3 quality / unique posts.

Relic
Diamond
 
Posts: 410
Joined: Mon Aug 06, 2012 3:18 pm
Location: England

Re: EDC16C31 1037396107 XDF

Postby franz727272 » Sat Dec 15, 2012 5:21 pm

Relic wrote:
franz727272 wrote:
Relic wrote:??? is 0. :wtf:

Attached is OEM EGR hysterisis on mine.
I assume for EGR duty% 1 and EGR duty% 2.
EGR switches off above High value.
EGR switches on again below low value.


Tuner pro keep in memory my modded sw. so xdf shoow me 0 :D

So do you think that is better try to set upper table to -1 and low to -2 :?


I am sure Honda have a reason for doing it ;) :wave:

Boost Hysterisis looks like it was correct for table 2.
Over 6000 samples.
mg vs rpm = openloop or feedback
:thumbup:

so to close egr like this screen is ok or is wrong? I'm very confused I assume with hds that is ok if all set to 0 :?
You do not have permissions to view the files yet. You have to be registered and you have to make at least 3 quality / unique posts.

franz727272
Silver
 
Posts: 84
Joined: Sat Aug 25, 2012 12:00 am
Location: rome italy

Re: EDC16C31 1037396107 XDF

Postby Relic » Sat Dec 15, 2012 6:03 pm

:thumbup: ;)

check it in winols afterward.
Should be 65335 and 65435

The ECU might consider 0 is OK... it might not.
I didnt write the honda ECU code.
So I think its best to do it Honda way unless you know better.

Relic
Diamond
 
Posts: 410
Joined: Mon Aug 06, 2012 3:18 pm
Location: England

Re: EDC16C31 1037396107 XDF

Postby Relic » Sat Dec 15, 2012 6:11 pm

I did notice you have 2 more 16x16 tables... Duty% vs rpm... after EGR maps.
I do not have these tables active.
Not sure what they are at present.

Relic
Diamond
 
Posts: 410
Joined: Mon Aug 06, 2012 3:18 pm
Location: England

Re: EDC16C31 1037396107 XDF

Postby franz727272 » Sat Dec 15, 2012 9:48 pm

Relic wrote:I did notice you have 2 more 16x16 tables... Duty% vs rpm... after EGR maps.
I do not have these tables active.
Not sure what they are at present.


Vhat address? Maybe something that works with the regeneration..

franz727272
Silver
 
Posts: 84
Joined: Sat Aug 25, 2012 12:00 am
Location: rome italy

PreviousNext

Return to Damos, Mappacks & A2L

Who is online

Users browsing this forum: No registered users and 1 guest