Touran 2.0 TDI BKD

by **Tourino** » Sun Mar 27, 2016 3:29 pm

hi guys, please rate my tune
I will be happy to comment and criticism
thanks!
I think to reduce afr...What do you think?

by **maki4evers** » Sun Mar 27, 2016 3:47 pm

hey.

looking on your TL it is enough to stop to look farther (is it real or only joke ?). soi copy-past from other file ? duration all decalibrated , copy-past ?

tourqesh.jpg

cheers

by **Tourino** » Sun Mar 27, 2016 5:41 pm

maki4evers wrote:hey.

looking on your TL it is enough to stop to look farther (is it real or only joke ?). soi copy-past from other file ? duration all decalibrated , copy-past ?

tourqesh.jpg

cheers

No, he wrote :) so bad?
if so do tl 445 nm, the engine will run on smoke limited, or am I wrong?
in duration map simply extended the duration of the axis up to 75 IQ

by **maki4evers** » Sun Mar 27, 2016 6:04 pm

I cant Look to your file now but if i good Remember your duration is all Changed not only the Highest Values. You arę right, your car run on smoka limiter, but like you can See name this is map to limiting smoke no to run on :) torque is this map on which your car should run.

by **Tourino** » Sun Mar 27, 2016 6:13 pm

maki4evers wrote:I cant Look to your file now but if i good Remember your duration is all Changed not only the Highest Values. You arę right, your car run on smoka limiter, but like you can See name this is map to limiting smoke no to run on :) torque is this map on which your car should run.

the duration has changed because I shifted axis.
and why the engine can not work on the Smoke lim. because the TL is a limiter that is removed, and then everything is limited to smoke lim. in soi I also shifted the axis and said axis for 75 iq.

by **maki4evers** » Sun Mar 27, 2016 6:32 pm

I know you shifted axis but in map values are diffrent to. This is your car and you can do what you want but if you ask about ratę your tune i tell you how IT should be. This is how ECU work :Dw, smoke and car run on torque.

by **Tourino** » Sun Mar 27, 2016 11:39 pm

maki4evers wrote:I know you shifted axis but in map values are diffrent to. This is your car and you can do what you want but if you ask about ratę your tune i tell you how IT should be. This is how ECU work :Dw, smoke and car run on torque.

ie soi and duration do not need to touch it? as it set duration of 70 iq. And if you do not touch SOI, the fuel will be injected far ATDC?
and to what extent do I increase the torque from the stock?

by **maki4evers** » Mon Mar 28, 2016 9:20 am

if you want get 70 mg then you must change duration but not all map only new axis. same for SOI you should calculate new axis not change all map. then you must to check EOI. read on forum how to change this maps. you can find a lot info about that for sure.

by **Tourino** » Mon Mar 28, 2016 7:17 pm

maki4evers wrote:if you want get 70 mg then you must change duration but not all map only new axis. same for SOI you should calculate new axis not change all map. then you must to check EOI. read on forum how to change this maps. you can find a lot info about that for sure.

thank you very much for the information! :)
Could you see if removed properly EGR?