Hello.

I can turn on/off imo with VagCommander, but it is not manage to adopt a key to the ECU.
I reckon the key code in the EEPROM, however, a kind soul tell me strict and address?

Attached EEprom readout.

Possibly. one who has a way to import a key?

hey mate.

if I understood well you need immo pin ? if yes your pin is 03433 and this is adresses in your file 12E and 160.

cheers

Hello and thank you.

Imo pin to be used to log in to adopt one / multiple keys. Is it not so?
It seems to me when I can read with VagCommand, but I can not figure out how to adopt a key.

So I thought I could find the key string in EEPROM and copy it to the same address in another ECU and get the key to work in another ECU.

I totally green with keys and the system

One that has a step by step way to code keys? The ones I found on youtube, I can not get to work in a Lupo 3L with 15+ ECU

03433 is the number I can read with VagCommandor.

The problems are however several.

First
I can not figure out how to find the addresses in a HEX editor.
How should the reading be? Hex / dec / oct 4/8/16

Which string I'm looking for?

Second

I can not log in to the immobilizer via VCDS with 3433/03444 it refuses and says it is not accepted.

I try to follow this guide

http://wiki.ross-tech.com/wiki/index.ph ... neration_3

and everything works perfectly until I have to make login. I will be rejected.

Some ideas?

Sorry I have not returned. Have mess with it sometimes but only really done anything here now that I've got a bench cable to work.

ok, I have found the addresses in hex file,

12E = 69 12F = 0D

160 = 69 0D

Then the code must be 69 0D but how it becomes (0) 3433 ??

383CI wrote:ok, I have found the addresses in hex file,

12E = 69 12F = 0D

160 = 69 0D

Then the code must be 69 0D but how it becomes (0) 3433 ??

look in 16 bit mode ;)

cheers

It's embarrassing, it makes no sense to me.

Thank you very very much :)

383CI wrote:Thank you very very much :)

no problem mate ;) we are here to help each other

cheers