Hi mates, I have got a chrysler 300c 3.0 crd with bosch Edc16 cp 31 ecu reference 0281012080, I have to replace original ecu but it's died, not communicate with any obd tool and then I tried to read by BDM port with some tools for to clone and not communicate's with any bdm tool.

I have buyed a spare ecu becouse I readed that you only have to learn keys for to match ecu with skim/immo module but, it's not right for this car, I have erase keys and learned again with avdi and keys ok but not match ecu, engine starts 3 seconds and stops by immo and has got this DTC fault on diagnostics.

I readed that you only have to change VIN for to match ecu with immo but I don't know how to.

The problem was when I read new spare ecu by obd for to do a test I wrote by mistake other ecu file and then locked the ecu,fans are working ...

I readed by bdm and not detect's mpc family so I got full read and flash file is corrupt and mpc is locked (this ecu don't have eprom).

So I didn't found a full bdm read for to recover my spare ecu, and I tried to write a full bdm read of jeep grand cherokee 3.0 crd with same ecu and spare ecu it's alive's again but this software is not valid for my engine and not starts ok.

T his is the thread that I wrote about this
http://mhhauto.com/Thread-Chysler-300c- ... l-bdm-read


Somedy can help me to get a full bdm read or sync ecu???

Any help would be appreciated.

Thanks

how did that ecu died ???

during driving or during Chinatoolsoperations

can been surely recovered with a cmd genuine tool or ktag genuine

The ecu was driving during driving, the engine stops when car is in movement.

I tried to read by bfm, with ktag, cmd and galletto and there is not communication...

soplillo wrote:The ecu was driving during driving, the engine stops when car is in movement.

I tried to read by bfm, with ktag, cmd and galletto and there is not communication...

and so for you it's the ecu ?
are your tools genuine or fake china ones ?

Yes of course, becouse I bought other spare ecu and it does work by bdm and obd port, car starts and stops after 2 seconds by immo.