launch control for jtd 8v edc15c7

by **Deman** » Fri Jul 08, 2016 7:13 pm

In DAMOS have a map TL 15*1 "BEG fuel quantity limiting (jump start) M_fuel - f (N)". She activated when you press the clutch pedal .

by **tako90** » Tue Jul 12, 2016 9:39 am

Hi Deman, i found this map. Address is F8E8C but i have Damos only for Alfa 147. I can't find this address in my file. This file is in my car https://drive.google.com/file/d/0B9hMf7MrylNXeXJpbGtIWHNrQ0k/view?usp=sharing . Can you help me? Thanks!

by **tako90** » Wed Jul 13, 2016 12:03 pm

Ok, i found address(79145). Now i have LC at 3100 rpm :D :clap: . But i want if possible to be more louder. How can i do it?

by **Deman** » Wed Jul 13, 2016 8:37 pm

as loudly as I do not know . Show prtScr map as done?
But I think because it is necessary to : 3100rpm = 60mm3,
3101rpm = 0mm3

by **tako90** » Thu Jul 14, 2016 1:02 pm

I think if possible sound like "popcorn" for LC and REV limiter. :) I will try and write for result.

by **alfa0944** » Thu Nov 10, 2016 3:57 pm

Can you help me with the rev limiter and remap on alfa 156 2.4 JTD 140 HP ? Thank you :angel:

by **panasonic1** » Fri Nov 25, 2016 3:24 pm

alfa0944 wrote:Can you help me with the rev limiter and remap on alfa 156 2.4 JTD 140 HP ? Thank you :angel:

what you want???

this tune is not good.

by **mrpaccio** » Tue Nov 28, 2017 3:07 pm

Hello to all...
I tried to do the launch control with hard cut at 3000 rpm but I can not get turbo pressure during the launch ...
Is there anyone who can give me a hand?
Thanks a thousand in advance ...
My car is an Alfa Romeo 147 1.9 jtd 115 cv .... edc15c7 ...
Thank you all!

by **mrpaccio** » Sun Dec 03, 2017 9:01 pm

Guys...
There is no one who can help me to raise the turbo pressure for the launch control ...
Even some clues would be welcome.
Thank you all!

by **vins18** » Mon Apr 08, 2019 2:20 pm

hi gentlemen,
if I try the launch with the original maps it will work.
if instead I try it with the remap with the 1 gear the rpm do not stop

help me