Passat 2.5Tdi conversion automatic gearbox/manual gearbox

by **nuno_205** » Thu Dec 29, 2016 1:31 am

I have a problem. I changed automatic gearbox for manual gearbox. The vehicle starts up and gets a lot of white smoke, injection is not correct. How to hit manual gearbox on the ECU?

by **sandor1987** » Thu Dec 29, 2016 11:37 am

upload your file or ecu nummer with software number we can check ;)

by **iv_yura** » Thu Dec 29, 2016 1:38 pm

You need write flash in ECU for manual gearbox.

by **nuno_205** » Fri Dec 30, 2016 12:54 am

Here is flash ori.

by **sandor1987** » Fri Dec 30, 2016 1:07 am

software is only automatic...

you need to flash it with manual software.
then read the dtc

by **nuno_205** » Fri Dec 30, 2016 11:54 pm

The flash on the ECU is good. I need to change engine codind: 03006 to 03005.

by **Gregotovar** » Fri Jan 20, 2017 1:17 pm

Before doing nothing login and coding abs control module,and instrument cluster panel.
ABS 11-Login
XXXXX
Coding
XXXXX
Adjust G85 ESP

And in instrument cluster panel,you have to read eeprom,and when you see byte 17,change for 15 value,and write back in cluster with vag k can commander for example.
Recode your ECU control module finally.

Regards