How to read Volvo EDC15?

by **vytt** » Thu Feb 23, 2017 5:17 pm

Hi, maybe you have some experience with reading/writing this ECU? I have Volvo V70 2002 D5 with "pro tuner" remap, I want to read it, analize and write back correctly ;) Should I be able to use mpps, Kess v2 or Fgtech Galletto 4 Master V54 Regards? I hope it can read via obd. Thanks!

by **ducus** » Sun Feb 26, 2017 1:44 am

Hello. You can directly read the flash 29F400. Or you can try EDC15 boot with Galletto. Connect pin 24 from 29f400 to ground , switch on ignition, disconnect terminal 24 and read. Follow the instructions displayed by Galletto. Will be the full content of flash. Same procedure for writing. Sorry for my English.

by **vytt** » Mon Feb 27, 2017 7:23 am

ducus wrote:Hello. You can directly read the flash 29F400. Or you can try EDC15 boot with Galletto. Connect pin 24 from 29f400 to ground , switch on ignition, disconnect terminal 24 and read. Follow the instructions displayed by Galletto. Will be the full content of flash. Same procedure for writing. Sorry for my English.

Thank you!