EDC15P not responding

by **danypk** » Thu Oct 26, 2017 6:13 pm

Hi guys! I have a golf 4 1.9 tdi arl ecu edc15P. I read the ecu with a mpps v16, got edited with edc suite. I did a rev limiter(popcorn-svrl) and after that flashed the file. I got no error, programming complete but the car it s not starting anymore. The esp light it s on, and i can t read/write ecu. What should i do?
And the bin if it s someting wrong with it

by **PES** » Thu Oct 26, 2017 6:47 pm

you have bricked the ecu, checksums are not corrected, use proper tools and you won't have any issues

by **danypk** » Thu Oct 26, 2017 6:53 pm

Thanks for the answer! So what should i do now? this ecu can be saved or i need to get a new one? If it can be saved mpps it s a solution?

by **danypk** » Thu Oct 26, 2017 7:02 pm

PES wrote:you have bricked the ecu, checksums are not corrected, use proper tools and you won't have any issues

And i forgot, when i verified checksums on edc suite it said that checksums are correct, Why?

by **Borislav** » Wed Nov 01, 2017 5:49 pm

Recovery whith MPPS!

by **fil1234** » Tue Nov 14, 2017 5:23 pm

yes with mppsv13 choose ori file then recovery and slow writing
you must conect and disconect ignition maybe several times till seed key has accepted from ecu

by **Skipper** » Mon Nov 20, 2017 12:29 pm

Do not use EDC suite. It fucks up the checksums.

Use proper tools as stated before :-)

by **UchoTD** » Fri Dec 08, 2017 10:47 pm

write with quality stuff..
this is very common problem.. chinnese mpps brick ecu..
or open ecu and boot mode with generic BOSCH

by **karicas** » Fri Dec 29, 2017 9:19 pm

Hi,

I flash today my ecu and i brik them.
I could not read nothing and the Pre-Glow don´t lit the car don´t work.
I have a party to recover the ECU with mpps 13.02 and original file but it works for me.
You must try it.

Rui Martins