FREE EGR DELETE

by **SamSun** » Wed Dec 20, 2017 8:00 pm

EGR Remover at it's best

by **Shooting** » Wed Dec 20, 2017 8:18 pm

SamSun wrote:EGR Remover at it's best

WinOLS actually.... EGR Remover doesn't do Checksums.... thanks for playing lol

wbr

by **goreo** » Sat Dec 23, 2017 7:03 pm

hello i need a EGR OFF :mrgreen:
ISUZU 4kj1
cheers

by **BlueSky** » Wed Dec 27, 2017 5:28 pm

Is it possible you could kindly do an egr delete on this file?
Im trying to switch off the fault codes as well, could you help/point me in the right direction.

Its a Peugeot Expert Tepee 2.0 diesel. RHK engine. Siemenes 801a ecu

Big Thanks.

by **Shooting** » Wed Dec 27, 2017 5:47 pm

BlueSky wrote:Is it possible you could kindly do an egr delete on this file?
Im trying to switch off the fault codes as well, could you help/point me in the right direction.

Its a Peugeot Expert Tepee 2.0 diesel. RHK engine. Siemenes 801a ecu

Big Thanks.

Are you sure this is an 801A, looks like an 803A, can you check

wbr

by **BlueSky** » Wed Dec 27, 2017 5:59 pm

That was quick, bear with.....
ahem, cough cough..... your right.. its an 803a. Im a numpty.

Its the egr and the dtc for the egr codes Im trying to delete, particularly circuit high which I think is P0406

Peugeot Expert Tepee 2007, RHK Engine.

SID 803 A
SW9664807380

HW9661642180

I have a problem with the above ECU (EGR light on fault code P0406) I have 5v on Pin6 which I have traced back to the circuit having continuity through the ECU on pins (Block 48V MR) D2 and C3. This occurred after the vehicle had been in at a Delphi dealers, so I'm not sure why it happened.

Big thanks for your help.

by **BlueSky** » Wed Dec 27, 2017 7:46 pm

If its any help, I've done a couple of screen grabs from PPD-Maps. I think I've found the right map, just cant rewrite it.

by **Shooting** » Wed Dec 27, 2017 8:01 pm

BlueSky wrote:That was quick, bear with.....
ahem, cough cough..... your right.. its an 803a. Im a numpty.

Its the egr and the dtc for the egr codes Im trying to delete, particularly circuit high which I think is P0406

Peugeot Expert Tepee 2007, RHK Engine.

SID 803 A
SW9664807380

HW9661642180

I have a problem with the above ECU (EGR light on fault code P0406) I have 5v on Pin6 which I have traced back to the circuit having continuity through the ECU on pins (Block 48V MR) D2 and C3. This occurred after the vehicle had been in at a Delphi dealers, so I'm not sure why it happened.

Big thanks for your help.

Here you go, I've also fixed the Checksums so you can just upload it to the car

wbr