diamond8 wrote:

rlees85 wrote:Hi

Finally had the courage to flash this file.

Process:

• Used a KWP2000+ Flasher with this tool: http://www.ecuedit.com/kwp2000-for-vag-cars-t38 big :thumbup: to RPM freak
• Always use slow mode
• Downloaded file made the changes I spoke about in first post.
• Checked edited firmware with this tool to be 100% sure (ME7 Check - ME7Check_160512.zip) http://nefariousmotorsports.com/forum/index.php?topic=447.0
• Cleared ECU error codes using an ELM327, then flashed the edited file using KWP and tool above, 100% successful

At time of writing, no engine light, no pending errors, car drives great. If anything changes I will post back.

hi, what software did you use to edit the bin file?

regards

josh

Shooting wrote:

diamond8 wrote:

rlees85 wrote:Hi

Finally had the courage to flash this file.

Process:

• Used a KWP2000+ Flasher with this tool: http://www.ecuedit.com/kwp2000-for-vag-cars-t38 big :thumbup: to RPM freak
• Always use slow mode
• Downloaded file made the changes I spoke about in first post.
• Checked edited firmware with this tool to be 100% sure (ME7 Check - ME7Check_160512.zip) http://nefariousmotorsports.com/forum/index.php?topic=447.0
• Cleared ECU error codes using an ELM327, then flashed the edited file using KWP and tool above, 100% successful

At time of writing, no engine light, no pending errors, car drives great. If anything changes I will post back.

hi, what software did you use to edit the bin file?

regards

josh

Mate, this post is from 2013, he's probably sold the car by now ;)

wbr

i didnt ask if he had the car boss man, asked what software......