SWIFTEC v1.8.7.5

New Swiftec out, we would like in short describe most important things introduced by new version.Newest addition to Swiftec is Launch Control module, it will enable any costumer to setup this feature in a big range of cars. We started now with EDC15V and EDC15P, but soon more ecutypes will be added! Many costumers requested us for interpolation modification possibility and we added it ! DPF OFF emulation mode has been improved a lot! More features and improvements have been added, costumers can check below, but before... As usually we would like to thank all our customers who helped us with preparation this version, but especially we would like thank Dean, Doyen, Dragos, Stefan and Vadim!

New Features

Launch Control module: New module introduced!
Launch Control module: Support for VAG with Bosch EDC15P and EDC15V has been added!
Automatical Map Recognition: Support for Citroen and Peugeot with Siemens SID807 has been added!
Automatical Map Recognition: Support for Hyundai with Siemens SIM2K has been added!
Automatical Map Recognition: Support for Volvo with some variations of Siemens SID807 has been added!
Automatical Map Recognition: Speed Limiter recognition for Land Rover Range Rover TDV6/TDV8 with Siemens has been added!
Automatical Map Recognition: Support for Mercedes with EDC17C43 has been added!
Automatical Map Recognition: Support for VAG with EDC17_C54 has been added!
Automatical Map Recognition: Support for VW Transporter with EDC16U1 has been added!
Automatical Map Recognition: More file types for BMW with EDC16C35 and EDC17_CP09 has been added!
Automatical Map Recognition: More file types for Hyundai and KIA with EDC16C39 has been added!
Automatical Map Recognition: More file types for Mercedes with Delphi CRD2.x has been added!
Automatical Map Recognition: More file types for Mercedes with EDC16C31 and EDC16CP36 has been added!
Automatical Map Recognition: More file types for Opel with EDC15M and EDC16C9 has been added!
Automatical Map Recognition: More file types for Opel with EDC17_C18 and EDC17_C19 has been added!
Automatical Map Recognition: More file types for Renault with EDC16CP33 has been added!
Automatical Map Recognition: More file types for Porsche with ME7.8 has been added!
Automatical Map Recognition: More file types for VAG with EDC16CP34 has been added!
DPF Removal 2.0 module: Support for Hyundai and KIA with EDC16C39 has been added!
DPF Removal 2.0 module: Support for Jaguar with EDC17_CP11 has been added!
DPF Removal 2.0 module: Support for Land Rover with EDC17_CP11 has been added!
DPF Removal 2.0 module: Support for Mitsubishi with EDC17CP15 has been added!
DPF Removal 2.0 module: More variations of BMW with EDC17_C06 and EDC17_CP09 has been added!
DPF Removal 2.0 module: More variations of Mercedes with EDC17CP10 has been added!
DPF Removal 2.0 module: More variations of Toyota with EDC17_CP07 has been added!
DPF Removal 2.0 module: More variations of VAG with EDC17_CP04 and EDC17_CP14 has been added!
DPF Removal 1.0 module: Hard DPF Reset for Mazda with Denso has been added!
Lambda/O2 Removal module: Support for BMW with Siemens MSV70 has been added!
Lambda/O2 Removal module: More variations of Citroen and Peugeot with MED17 has been added!
Lambda/O2 Removal module: More variations of VAG with ME7.1.1 has been added!
Lambda/O2 Removal module: More variations of VAG with MED17.1 has been added!
Automatical Map Detection: Siemens SIM2K has been added!
ECU Detection: Mitsubishi and Subaru with Denso hardware and software number detection has been added!
ECU Detection: Opel with Denso software number detection has been added!
MAP Mode: Interpolation modification way has been added by absolute or percentage values
Project DB: Mouse right click menu with columns control possibility has been added!
Project DB: Different additional fields as VIN, Model Year, HP, etc has been added!
Project DB: Possibility to filter by few words with separator '+'
Checksum Detection: '16/8Bits based' automatic recognition for VW with Bosch DDE has been added!
Checksum Detection: 'Bosch EDC7' automatic recognition has been added!
Checksum Detection: 'Bosch EDC16/EDC16+' automatic recognition for files with size range from 248KB to 2MB has been added!
Checksum Detection: 'Bosch Opel ME7.6.x/ME7.9.x' automatic recognition for 832KB ME7.6.2 files has been added!
Checksum Detection: 'Bosch Smart E2' automatic recognition has been added!
Checksum Detection: 'Bosch Smart E3' automatic recognition has been added!
Checksum Detection: 'Fiat IAW 4SF/4DF/5SF' automatic recognition for 576KB IAW 5SF files has been added!
Checksum Detection: 'IAW 4AF/59F/5AF Euro2-4' automatic recognition 320KB IAW 4AF/59F/5AF files has been added!
Checksum Detection: 'Siemens F200/F400' automatic recognition has been added!
Checksum Detection: 'Siemens SID Ford/Peugeot/Volvo' automatic recognition for 4MB SID807 files has been added!

Improvements

DPF Removal 2.0 module: Iveco with EDC16C39 much more stable working now
DPF Removal 2.0 module: Mercedes with EDC16C31, EDC16C32, EDC16CP31, EDC16CP36 has been a lot improved!
DPF Removal 2.0 module: Emulation solutions has been a lot improved!
ECU Detection: Bosch ECU type detection has been improved
ECU Detection: Problem with detection Hyundai with Siemens SIM2K as Bosch has been fixed!
2D Mode: Percentage changes now much more accuracy
MAP Mode: Show Original/Modified values function applied to Axises also
Project DB: Cars, Models, Engines list has been updated
Checksum Detection: 'Bosch EDC16' and 'Bosch EDC16+' automatic recognition has been improved!

Bugfixes

OBD Reading Protection: Checkbox was not active all the time
2D Mode: Forward scrolling by clicking on scroll bar could not be done in 16/32BIT with small X-Zoom value
MAP Mode: Min and Max limits for Axises now applied with factor and offset
MAP Mode: Problem with Change by Edit by not integers in 32BIT FLOAT has beed fixed
MAP Mode: Y Axis could not be edited correctly with 8 BIT mode

Erm, do you care explaining to us noobs what swiftec is?
Curiously it's alos the name of a manifacturer of PC water cooling components.

It is chip tuning software made by Portugal tuners.

Take a look more about Swiftec here: http://vcpowerteam.com/

Seems likemgood software, but at 4 times the price if WINOLS which is many top tuning companies opinion, the best software and most powerful on the market today.

I use WINOLS, not that I am anything near a top chip tuner, but once you learn how to use it, it's not so bad.

Vacations time coming and as normal NEW release from VCPowerTeam come!

Possibility of tuning the Siemens PCR2.1 (VIDEO) is the latest and more important news in european tuning industrie and because of that we have made a special automatic map recognition algorithm that makes the hard job of building each of the maps by yourself simple and easy! For Nm table map for example there are "only" 52 similar maps! All together we can say Swiftec makes hundreds of maps being automatically detected, named, converted and associated.

As many customers were requested we also added automatic map recognition of Volvo ME7.

New and fully tested DPF OFF solutions were developed for Mercedes Delphi CRD1.x Nissan Denso, Opel Denso and Subaru Denso, also new algo for Kia/Hyundai EDC16C39 and some changes in many others...

With hard working with our costumers we developed also some new Lambda OFF solutions for Alfa Romeo and Mini!

Good news also because this version was completly reworked to be translated for any other language, and as results, first translations were done, it's German, Portuguese, Russian and Spanish languages! Feel free contact us if you would like help to translate Swiftec to your motherland language!

As usually our greetings and thanks fly out to all our customers who helped us with preparation this version, but especially we would like thank: Chris F., Christian H., Grzegorz K., Joao A., Juergen A., Kenny, Maurizio C., Radek Z., Richard W., Terje R.F!

Below you can check full list of changes introduced:

New Features

Automatical Map Recognition: Support for VAG with Siemens PCR2.1 has been added! (VIDEO)
Automatical Map Recognition: Support for Volvo with Bosch ME7 has been added!
Automatical Map Recognition: More file types for Alfa Romeo with EDC16C39 has been added!
Automatical Map Recognition: More file types for BMW with EDC16C35 has been added!
Automatical Map Recognition: More file types for Chevrolet with EDC16C39 has been added!
Automatical Map Recognition: More file types for Citroen and Peugeot with EDC17_C10 has been added!
Automatical Map Recognition: More file types for Mercedes with EDC16C31 has been added!
Automatical Map Recognition: More file types for VAG with EDC17_CP20 has been added!
DPF Removal 2.0 module: Support for Alfa Romeo, Fiat, Ford and Lancia with Marelli MJ8D has been added!
DPF Removal 2.0 module: Support for Citroen with Marelli MJ8D has been added!
DPF Removal 2.0 module: Support for Fiat with Marelli MJ8F has been added!
DPF Removal 2.0 module: Support for Hyundai and KIA with EDC16C39 has been added!
DPF Removal 2.0 module: Support for Mercedes with Delphi CRD1.x has been added!
DPF Removal 2.0 module: Support for Opel with Denso has been added!
DPF Removal 2.0 module: More variations of Iveco with EDC16C39 has been added!
DPF Removal 2.0 module: More variations of Mazda with EDC16C34 has been added!
DPF Removal 2.0 module: More variations of Mercedes with EDC17CP10 has been added!
DPF Removal 2.0 module: More variations of Subaru with Denso has been added!
Lambda/O2 Removal module: Support for Alfa Romeo with Bosch MED7.1 has been added!
Lambda/O2 Removal module: More variations of Mini with Bosch MED17.2 has been added!
Launch Control module: Support for Ford with Bosch EDC15P has been added!
Launch Control module: More variations of VAG with Bosch EDC15P has been added!
Intel HEX import: Support for files from BMW Diagnostic System has been added
Main module: Support for German, Portuguese, Russian and Spanish language has been added!
MAP Mode: Copy to similar maps can be done only to maps with same names
Checksum Detection: '16/8Bits based' automatic recognition for Deutz with Heizman has been added!
Checksum Detection: '16/8Bits based' automatic recognition for Isuzu with Transtron has been added!
Checksum Detection: 'Bosch Merc ME2.8' automatic recognition has been added!
Checksum Detection: 'Bosch ME9' automatic recognition has been added!
Checksum Detection: 'Delphi Ford TDCi' automatic recognition for 512KB Jaguar swapped files has been added!
Checksum Detection: 'Denso' automatic recognition for 512KB Jaguar swapped files has been added!
Checksum Detection: 'TRW EMS2' automatic recognition for 1MB files has been added!

Improvements

DPF Removal 2.0 module: Mercedes with EDC16C31, EDC16C32, EDC16CP31, EDC16CP36 more stable working now
DPF Removal 2.0 module: Nissan with Denso completely reworked
DPF Removal 2.0 module: Opel with Bosch EDC17_C19 has been a lot improved!
ECU Detection: Bosch EDC17 detection has been improved!

Bugfixes

MAP Mode: Interpolation could not be used if basic field did not filled

Hi Swiftec,

Thanks for the interesting information, Winols is less than half your price, and has the same features when using mappacks, and damos files. Damos files are simple and easy to obtain aswell.

Why should we be paying more than double for your product with no proven track record than the worlds leading software WInols, which is used by almost all the top tuning companies in the world?

Waits for next spambot post :roll:

Rocket wrote:Hi Swiftec,

Thanks for the interesting information, Winols is less than half your price, and has the same features when using mappacks, and damos files. Damos files are simple and easy to obtain aswell.

Why should we be paying more than double for your product with no proven track record than the worlds leading software WInols, which is used by almost all the top tuning companies in the world?

professionnal tuners have no time to loose searching the maps they want to tune or remove without hours to find the good single ...
that's why swiftec is not so expensive as you say if i hadn't yet winols with lot checksums ... i certainly buyed swiftec if i had nothing i like winols because i use it since years and it bring lot of knowledge but it's not always the quickest solution

For professionnal use i think swiftec is fine anyway if you are not professionnal i am not sure you can buy it ...

I guess each roduxt has its pros and cons, and swiftec is the new kid on the block, and being a professional as you say, nor winols or swiftec find ALL the maps anyway, and none are able to identify them correctly or get the axis correct or the other calculations and memory addresses, so no matter what you choose, without a damos or map pack of sorts, you will still need the tools to use to do the job, and winols has been around the longest and the most support and experience revolves around winols, swifter --- for now that is.