Let me start off by saying I'm very new to this. The car is a 2010 model year Hyundai Genesis Coupe 3.8l v6.
I've purchased PCMFlash dongle/software and have been able to read/write my ECU. I've found the max rev limiter and have been able to modify it. The address for that is 2BF22. I changed it to DAC0 (hex) which is 56000 (dec). Delphi/Hyundai/Kia takes the dec value and divides by 8 to get the actual value. so DAC0 gives me 7000rpm limiter. Stock was 6700ish so 7000 is a safe range just for the test. I Believe I've also found some ignition maps, but I have no way to define the axis data to confirm if that's what I've found. Addresses for those are 26EAC and 27138
I think I may have also found the e-throttle control at address 28D1E but I'm just speculating
Any help that could be offered would be greatly appreciated. I'd like to define as much as possible in an attempt to modify the ecu in accordance with a tune(s) to accompany future mods

Ive now also found the stationary rev limiter which limits rpms under a certain speed (haven’t found the speed yet). That’s at 2BF24

I didnt make any progress over the weekend. Any chance someone has taken a look and has anything to offer?

Any chance someone has taken a look at this and has advice? I've made very little progress

I'm looking for the speed limiter for this car. Does anyone know the address?