EDC16U34 BLS 1.9 tdi I'm looking for several maps

by **banshe12** » Sat Jan 13, 2018 6:15 pm

Hi guys! I have a request.
Could someone find a map responsible for the frequency of DPF regeneration? I would like to set the regeneration process to always turn on every 400km, now with the ash value of 42g DPF is burning every 360km. I noticed that this period is getting shorter. It's hard to remember and count kilometers, and this change would be very helpful.
Another issue, is there a map responsible for increasing the idle speed depending on the temperature of the coolant? Can anyone indicate the addresses of these maps?
Thank you very much!

by **banshe12** » Sun Jan 14, 2018 8:38 pm

Znalazłem mapy zmiany prędkości obrotowej biegu jałowego.
Czy są to dobre mapy?
18FD7C 4x4, 192B10 4x4, 1E83B2 4x5, 1E8492 4x3

I can not find a map that increases idling when the car is in motion.
I made VCDS logs and I know that ECU raises its turnover only after heating the engine to 45 degrees from 819rpm to 903rpm, with the car having to move faster than 3-4km / h. Look at the attached log from VCDS.
I looked for all the possibilities, values 903, 900, 3181 (45C) and I did not find any map.
I want to find it and change it, because I think that the revolutions can be raised earlier, as the engine is cold too.
Can anyone tell me what to look for?

by **banshe12** » Thu Jan 18, 2018 8:30 pm

Can anybody help me?

by **maki4evers** » Thu Jan 18, 2018 9:55 pm

hey.

look here : 1E83B2 ,1E8478 ,1E8492 .

cheers, pozdrowionka ...wpadnij z browarem hehe ;P

by **banshe12** » Sun Jan 21, 2018 3:32 pm

Thank you very much.
I was looking for a map in damos that is responsible for dynstans for dpf filter regeneration.
I found one.
Is it enough to change the distance, are there any more?
I want regeneration to be every 400km
Could someone confirm?

by **banshe12** » Sun Feb 04, 2018 9:49 am

banshe12 wrote:I can not find a map that increases idling when the car is in motion.
I made VCDS logs and I know that ECU raises its turnover only after heating the engine to 45 degrees from 819rpm to 903rpm, with the car having to move faster than 3-4km / h. Look at the attached log from VCDS.
I looked for all the possibilities, values 903, 900, 3181 (45C) and I did not find any map.
I want to find it and change it, because I think that the revolutions can be raised earlier, as the engine is cold too.
Can anyone tell me what to look for?

Could someone answer me?