EGR off VW edc16U34

by **Harrycz44** » Tue Mar 06, 2018 7:43 pm

Hi all
I tried egr off in VW edc16U34, I change hysteresis maps, but diagnostic tool still show me that egr is open for 100%. Can you look for my files that is correctly off? Thank you

by **jurebv** » Tue Mar 06, 2018 8:04 pm

in attachment your file with egr off

Best Regards

by **Harrycz44** » Tue Mar 06, 2018 9:43 pm

Hi thank you for your file, did you find any wrong in my files?

by **jurebv** » Wed Mar 07, 2018 8:38 am

I haven't checked what changes you made because you didnt post original file to compare BUT i saw that hysteresys for EGR were not changed so you must've done something wrong i would suggest you apply my changes to ori file

by **Joca** » Sat Mar 10, 2018 4:09 pm

Hi to everyone, i am a new member and new at remapping :)

I tried to remove DPF via switch and EGR via hystersis maps on VW T5 2.5, when i uploaded the map on car , there was no dpf or egr error but car lacks of power when driving and reports p2279 error, when car is on idle there is no this error.

Is this mechanical issue or it has something with my map? Can anyone check is my map ok ?

Thanks alot, and sorry about my bad english