Launch control edc15

by **Livero** » Tue Oct 24, 2017 2:05 pm

Hi to everyoane....
Can anyone help me with some info about a launch control?
It`s a Seat leon ARL with Gtb2260vk turbo..
Now with this launch map it do 0.1-0.2 mbar.
Thx in advice
Some info about what rpm it's the best and etc.

by **jelmer52** » Tue Oct 31, 2017 1:29 pm

Send me your file and i will help you make launch contol or pops and bangs

by **Livero** » Mon Nov 06, 2017 10:32 am

Okay, i sent u an pm!
If u can really help me please do it! i spent a lot of money and time for nothing!
Thx in advice! :( ;) ;)

by **mrpaccio** » Wed Nov 29, 2017 8:46 pm

Hello to all...
I have the same problem...
I made the launch control at 3000rpm to my car, Alfa 147 Jtd 115 sw 332-536 ...
When the accelerator is pressed all the way down, the turbo pressure reaches a maximum of 0.2 bar ... Is there anyone who can help me? Thank you in advance!

by **UchoTD** » Fri Dec 08, 2017 10:31 pm

smoke limiter? :)
bouncing rpm on launch control?

by **mrpaccio** » Wed Dec 13, 2017 8:44 pm

Hi ... thanks for answering me.
I also tried with the smoke limiter map, but it does not change ...
The turbo pressure always remains too low 0.2 bar...
Do you have other ideas?

by **Drews3** » Wed Mar 14, 2018 10:12 pm

Livero wrote:Hi to everyoane....
Can anyone help me with some info about a launch control?
It`s a Seat leon ARL with Gtb2260vk turbo..
Now with this launch map it do 0.1-0.2 mbar.
Thx in advice
Some info about what rpm it's the best and etc.

VAGSUITE EDC !! thats all you need to learn but winols is better

by **Drews3** » Wed Mar 14, 2018 10:13 pm

mrpaccio wrote:Hi ... thanks for answering me.
I also tried with the smoke limiter map, but it does not change ...
The turbo pressure always remains too low 0.2 bar...
Do you have other ideas?

I can help you i'm from Milan ^_^ you arround here ? you must change your boostguard otherwise even if you change the map the turbo won't boost up i think

by **mrpaccio** » Fri Mar 16, 2018 12:33 am

Hello ... I'm Italian ... thanks for the advice ... do you mean the turbo limiter? Could you give me some information on the address to be changed? I would like to exceed the current 0.2 bars during the launch control but I can not! My software is 332-536 alpha 147jtd 115hp 8v