Hello guys,

for the past few months i have been working heavily on learning a lot about EDC15P's and dieseltuning in general. I am very grateful for this forum, the guides, and the numerous video's og youtube. All those have taught me a lot, and i am very satisfied with the outcome already. However i have come to something like a dead end now. The car i am working on is a 1.2 TDI Lupo 3L, and the plans are to fit an GT1749VA charger and PD150ARL injectors. At the same time i want to completely remove the EGR system with cooler, and use the EGR cooling pipes for a liquid cooled intercooler (To further aid high EGT). And here's the problem; i cant find the bloody EGR switch (cowFUN_ARF) to disable it. I have searched hours and hours on the forum, but no hit.
Can somebody please point me in the right direction? Ideally would be a damos for any EDC15P ecu so i can compare with my file. I have tried the A4 1.9 TDI damos from in here, but since it is a VP i am not so sure i can rely too much on it.
Your help would be highly appreciated.

My file is attached if someone might need it.

Thanks in advance, and best regards from Denmark.

In edc15P+ easiest is to close EGR by map. Disabling by switch can be more complicated and I have never used it. Just set the EGR map to the maximum value, in your case it is 800 mg/stroke.

Hi igauto, this solution is not the same, as the egr will not be closed 100% . This you can verify by checking it with vcds. Will still be around 20%. Furthermore it will give a DTC if you choose to remove the valve. So by disabeling the cowFUN_AGR you can just thow it all out.
But it seems like i found it however, at 71c68.
Thanks for your reply.

Can I ask which software you use to edit and which hardware to flash?
Just out of interess.