audi s3 8l 210hp tunning software

by **ands151** » Sat Jun 13, 2015 10:26 am

Hi guys im new to this forum, I would like to get help on a custom map for my audi s3 2001 210hp AMK motor, K04 turbo.
no mods apart from a k&n panel filter inside the airbox.
cheers

by **milenakalski** » Fri Feb 24, 2017 3:43 pm

send me a original file of your car (if you have a flasher) :)

by **spacey3** » Tue Mar 21, 2017 1:55 pm

WinOls and/or TunerPro with relevant xdf/ols files.

There's plenty to be found with regards to xdf/ols files lying around for these cars.

As suggested, post your ori so we know what software version you have and help with a corresponding definition file.

by **ljarcher** » Thu Apr 19, 2018 5:41 pm

Hi, I'm looking for xdf and ols definition files for my 2001 Audi S3 AMK and noticed you offered to help locate them for another member if they posted an ori file. Could you do the same for me? File attached. Thanks in advance.

by **ljarcher** » Fri Apr 20, 2018 6:31 pm

Hi, I've managed to find one definition file but it seems to lack quite a lot of maps as I believe there are over 300. Are the other maps just not really useful or am I missing some critical ones? Any advice would be most appreciated. File attached, may be of use to someone else as at least its helped me to do a cat delete. Thanks.

by **jurebv** » Sat Apr 21, 2018 11:15 am

torque monitoring:
KFMIZUOF - 1174F
KFMIZUFIL - 1170F
KFMPED- 11B63
KFMPNS - 11BA3
KFMDZOF - 11B23
KLNPED - 11BF8

timing:
KFZW - 120DD
KFZW2 - 1219D
KFZWOP - 11557
KFZWOP2 - 11607
KFZWMN - 1756C

Load/torque
KFMIRL - 150CA
KFPED - 1625C
KFMIOP - 16616
KFLDIMX - 1E200
KFLDRL - 1E352
KFLDRQ0 - 1E492
KFFLLDE -1E760
KFLDHBN - 1E8F2
KFTARX - 1E932
LDRXN - 1EAD4
LDRXNZK - 1EB16
KFDLULS - 1EB93
KFVPDKLD - 1EBEB
KFDPLGU - 1EC92
KFPLGUB -1ED36

Fueling:
KFLBTS - 192A5
KFFDLBTS - 191E5
LAMFA - 1C989
TLAFA - 19010
TABGBTS - 1CADC

should be enough to get you started ;) now start defining and learning (some maps are 8bit, some 16bit , same for axis)

by **ljarcher** » Sat Apr 21, 2018 9:50 pm

Thanks for the map addresses, should keep me going for a while! I recognise quite a few there that are useful and I'll look the rest up. Cheers :angel: :angel:

by **ljarcher** » Mon May 21, 2018 7:28 pm

Hi, I've added KFPED to my original definition file (V10). What I need at the moment really is any of the maps/variable addresses relating to overrun fuel cut in MDFAW as I'm trying to write a pop bang map but just altering the ignition timing maps doesn't seem to work and I'm thinking the overrun maps may be overriding my changes. Any help most gratefully received. Thanks :D :D :D

by **ljarcher** » Mon May 21, 2018 7:34 pm

Hi again, forgot to mention, KFPED is a nice introduction to writing a map file, safe enough to alter without risk of engine damage but gives the car a different feel. No power increase but you could for instance make 50% pedal travel equal to 100% making the car feel sportier. Try the definition file with TunerPro (free).

by **ljarcher** » Wed Jul 11, 2018 11:47 pm

Currently adding more maps to AMK file, overrun fuel cut all done, just looking at a few others that were changed for my stage 2 remap then I'll upload the new definition. I have another stage 2 file, yet untried, that I will have a look at too.