Boostlimit location EDC15 Audi A4

by **bulgare** » Thu Jan 31, 2013 12:08 pm

Hi! I am new here an I think is a great forum!
Now I need your help! I have changed the file from my car (Audi a4 MY 2000 110 ps)but I really don`t understand why does the turbopressure just stays on the factory settings.I have read the manual for begginers, but it is for PD, not for rotaiting pump motors. Please check that for me.

by **adriancl** » Thu Jan 31, 2013 10:32 pm

If you read carefully, you would have seen SVBL,in your file is not changed,stock value 1990 mBar.Turbo request is 2340 mBar. :o :o
Also Boost limiter map is not change,stock value 2150mBar. :shock:
Here is addresse:
SVBL-5AD72,72D72
Boost limiter/atm.-5B556,73556.
Харесва ми град Балчик.

by **bulgare** » Sat Feb 02, 2013 3:39 am

Hi, thanks a lot about your post. I changed the boost limiter map as high as the requested boost (2340mbar). Then I chaged the SVBL also to value 2400, but the turbo pressure stayed still to the stock value (1950mbar). Then I changed the SVBL to 4000 and then I saw that the pressure reached 2340mbar. Is this SVBL value "1950" in mbar ?
Аз също много харесвам Балчик :)

by **kennfeld** » Sat Feb 02, 2013 12:16 pm

bulgare wrote:Hi, thanks a lot about your post. I changed the boost limiter map as high as the requested boost (2340mbar). Then I chaged the SVBL also to value 2400, but the turbo pressure stayed still to the stock value (1950mbar). Then I changed the SVBL to 4000 and then I saw that the pressure reached 2340mbar. Is this SVBL value "1950" in mbar ?
Аз също много харесвам Балчик :)

you turbo is maybe rusty ... on the GV

by **bulgare** » Tue Feb 05, 2013 10:10 pm

You were right! Thanks again. Now I have another stupid question - to the Dirver`s wish limit. I have set all the 3 limiters just for test to 60mg. and the drivers wish to 61mg./100% load but when I made a log with VCDS and I saw that the limiters were all till 51 mg. and drivers wish was just 44 mg./100 % load. I miss something... any idea ?