original files question

Post your original ECU files here. Please specify attachment data.

Return to Orginal ECU files

original files question

Postby richw01 » Fri Apr 27, 2018 9:59 pm

Ok might be a silly question but are the files on ecubin.com virgin files. need to make a virgin ecu for someone who has spiked the original.
Thanks Rich

richw01
New user
 
Posts: 6
Joined: Tue Apr 24, 2018 12:28 pm
Location: nottingham

Re: original files question

Postby ecuedit » Fri Apr 27, 2018 11:25 pm

hello,
files are original files as named.

User avatar
ecuedit
CARPRO
 
Posts: 2221
Joined: Fri Feb 24, 2012 10:10 pm
Location: European Union

Re: original files question

Postby richw01 » Sat Apr 28, 2018 11:41 am

Thanks for the replay, so writing an original file to an ecu is enough to virgin a ecu to transplant to a different car?
(will clear all codes).
First time I have done this and was under the impression that a original file is just for the running of the engine and not the immobilizers.
am i right in thinking that the mapp and the immobilizer code are stored in different places (thought immobilizer was on an eeprom mapp another chip)

I know this might be obvious to all of you but i am very new to this and a good fried of mine has just damage an ecu at his garage and I am trying to help him out
Thanks Again

richw01
New user
 
Posts: 6
Joined: Tue Apr 24, 2018 12:28 pm
Location: nottingham

Re: original files question

Postby jurebv » Sat Apr 28, 2018 12:21 pm

no, it is just original flash file not eeprom

User avatar
jurebv
Tuning Service badge A
 
Posts: 811
Joined: Fri Dec 08, 2017 2:28 pm
Location: Makarska, Croatia

Re: original files question

Postby richw01 » Sat Apr 28, 2018 2:15 pm

ok that's what I thought so is there any where I can get a virgin eeprom file from or is my only option to clone if the other ecu is still readable Thanks Again

richw01
New user
 
Posts: 6
Joined: Tue Apr 24, 2018 12:28 pm
Location: nottingham

Re: original files question

Postby jurebv » Sat Apr 28, 2018 2:33 pm

if the old ecu is still readable, just write eeprom from old ecu to new ecu

User avatar
jurebv
Tuning Service badge A
 
Posts: 811
Joined: Fri Dec 08, 2017 2:28 pm
Location: Makarska, Croatia

Re: original files question

Postby richw01 » Sat Apr 28, 2018 7:41 pm

hi, this is what i am hoping to do but if i can not read the eeprom is there any other way?

richw01
New user
 
Posts: 6
Joined: Tue Apr 24, 2018 12:28 pm
Location: nottingham

Re: original files question

Postby jurebv » Sat Apr 28, 2018 7:57 pm

how are you trying to do this? it cannot be done over OBD2.

Other way is to remove immo from new ecu

User avatar
jurebv
Tuning Service badge A
 
Posts: 811
Joined: Fri Dec 08, 2017 2:28 pm
Location: Makarska, Croatia

Re: original files question

Postby richw01 » Sat Apr 28, 2018 8:42 pm

both computers will be off I have a eeprom reader and ktag, I was hoping to avoid immbo off tho

richw01
New user
 
Posts: 6
Joined: Tue Apr 24, 2018 12:28 pm
Location: nottingham


Return to Orginal ECU files

Who is online

Users browsing this forum: No registered users and 6 guests