Hello people ,
Long story short , i've got an Audi a4 1.9tdi 130bhp , with edc15p+ that i had to do immo off , cause the keys died .
Interesting fact is that after immo off was done , car is running ok , but i've got a lot of flashing lights on the dashboard , glow plug light , traction control , key light , 4 indicators , air conditioner doesn't work ..

The ecu i got is this :
https://www.photobox.co.uk/my/photo/full?photo_id=500779132277
And the Following DTCS :
This one is on the Engine part ,
https://www.photobox.co.uk/my/photo/full?photo_id=500779132667
And this one on the instrument cluster ,
https://www.photobox.co.uk/my/photo/full?photo_id=500779132134

And the symptoms are like this .. i made a small video , hope you can see it :
https://imgur.com/T4yMiYk

Before you start asking questions ,first i made immo off on the flash only ( with immodecoder 3.2 ) , car started but like that on the video . Next i made immo off on the eprom with the same software , same result . Next original flash , and immo removal on the eeprom only , the same , next with another modified flash , same .. i think you can understand my point of view .. same results always , and same DTCs .

I unplugged the immo antenna , and same results aswell , car starts , like a christmas tree , same dtcs .

Already discussed this with a few people and no one seemed to have seen anything close to this .

Thanks in advance , any help will be very welcome

Maybe some coding is needed , adapt the key to the dash or something ? I've never done this , all other vag immo off that i did were straight and simple . :? :?