Hi
I try searching for a differences in files - my original 68ps and the original 95ps (found on the net)
These cars went out in factory at 68ps and 95ps, but all the h/w is the same.
I compared the founded potential maps (abaut 140) in my 68ps file to corespondens maps in 95ps file. Most of the maps are the same but I found a few (7) in which they are different. here I have made a small comparison :
3d : http://naoku.com.pl/temp/compare.pdf
text : http://naoku.com.pl/temp/comparetext.pdf
Is it possible from that comparison say what are this maps and can i try to copy them to my 65ps file ? If so, which one? 1,2,3,6 ?
I am completely new in winols but I can handle copying maps and correct cs :)
Also here is :
- my oryginal map : resources/smart-forfour-454-2004-1-5cdi-manual-bosh-edc16-edg16c/12156
- 95ps map : post2508?hilit=colt#p2508

Best regards
Adam

are you sure about same injectors?

Sw 1037379699 is from 68hp version

RPM freak wrote:Sw 1037379699 is from 68hp version

Ha. thx. So this one from net post2508?hilit=colt#p2508 have wrong description yes ? It's not 95ps and both files my and this are 68ps ? Than explains everything.
Thx again

I think You are right - here this number 1037379699 is described as 68ps version. Thx again.
http://www.digital-kaos.co.uk/forums/sh ... i-EDC16C31

Again, I do not know what's going on ... I found the full read of 1037379699 :
http://naoku.com.pl/temp/Mitsubishi_Col ... 379699.rar
Its also described als 95ps and have vin. vin decoder also says thats 95ps file. I also found other versions:
1037374554 - http://naoku.com.pl/temp/1037374554.rar
1037372205- http://naoku.com.pl/temp/1037372205.ori
1037381302.rar - http://naoku.com.pl/temp/381302.rar
Proper Maps on this files also look the same.
Is it possible, however, that all 68ps?
I have to check again for example on: http://japancars.ru/index.php?route=catalog/mitsubishi both versions and I have definitely the same injectors: mn960201

Torque Limiter - Main 95hp vs 68hp file

Comparison of Torque limiter in your mod files.

Tuner 1 - really had no idea what is he doing. Complete file is very bad.

Tuner 2 - better, but he made a lot of mistakes in the file. This is why the engine has problems to rev pass 3300rpm

These maps are not Torque Limiter maps.Are IQ limiter maps .
Just my opinion.

RPM freak wrote:Torque Limiter - Main 95hp vs 68hp file

Thank You so much ! I have found this map and just change values in this one map from 95hp to my 68 hp oryginal map and finaly i fill i have 95ps :)