Hello again guys ,

So i did spend some time through winols and with some help from different parts i managed to find some maps on my personal car file
but i didn't find the address for the SVRL, if someone could point me out i would appreciate and allso if some other maps are missing for a stage 1 please if someone is kind to tell me what's missing i would allso appreciate a lot

BMW e46 320d 150hp 2002 EDC16c31 SW:361858

i attached the ori file , .ols version and a mappack

Back again ,

so i think i found the address for the SVRL and it's FD18C. If i am wrong please someone correct me

Found another map , Lambda AFR table map which is located at E7A16 ( for Z axis stoic value and AFR use factor offset .0145 .For X axis description mass air flow , unit mg/hub factor offset 0.1 , For Y axis description Engine speed unit RPM offset factor 1.0 )

No one?? Any help ??

Because I searched a lot for lambda map, and found your topic, how can I help you? what maps you did not find?

ppr wrote:Because I searched a lot for lambda map, and found your topic, how can I help you? what maps you did not find?

Well i am not sure if i have all the maps needed for a decent stage 1 , il'l write all the addresses for all the maps i found and if i miss something could you point it out ? thanks .


I have put some work finding all these maps(with help from others and forums search) , don't know if all of them are correct but a thanks would be appreciated

EDC16C31 sw: 361858

Drivers wish 1 E0674 10x16 pedal % factor 0.012207
Drivers wish 2 E08B8 10x16
Smoke map Boost E13AE 12x16
Smoke map MAF E15FC 16x16
EGR hysteresis 1 E2A22 25x1
EGR hysteresis 2 EB54 25x1
EGR hysteresis 3 E3AA8 25x1
EGR hysteresis 4 E3B0E 25x1
EGR hysteresis 5 E3B6C 21x1
Torque limiter E66DA 21x1
IQ limiter RPM-speed E6B42 9x9
Torque limiter by gear E6DC2 21x1
Torque limiter by gear E6E18 21x1
Torque limiter by gear E6E6A 19x1
Torque limiter by gear E6EC4 21x1
Torque limiter by gear E6F1A 21x1
IQ limiter by temp&speed E6F84 16x13 Yaxis factor 0.1 offset -273.1 (for degrees celsius)
Lambda AFR table E7A16 16x16 Factor for AFR 0.0146
NM to IQ conversion 1 E80EA 16x16
NM to IQ conversion 2 E832E 16x16
NM to IQ conversion 3 E8572 16x16
SOI in NM E8EC8 16x16
Torque limiter fail safe E9408 25x1
Torque limiter gear 1 E945A 15X1
Torque limiter gear 2 E94C0 15X1
Torque limiter gear 3 E9526 15X1
Torque limiter gear 4 E958C 15X1
Torque limiter gear 5 E95F2 15X1
Torque limiter gear 6 E9658 15X1
Torque limiter gear R E96B3 15X1
Start Of Injection 1 EA80C 16X16 degree factor 0.023437
Start Of Injection 2 EAA50 16X16
Start Of Injection 3 EAC94 16X16
Start Of Injection 4 EAED8 16X16
Start Of Injection 5 EB11C 16X16
Duration 1 F5364 32X16 Duration is in microseconds factor 1.0 and IQ is in mm3
Duration 2 F57C8 32X16 or i converted it into mg/str using factor 0.0085
Duration 3 F5C2C 32X16
Duration 4 F6090 32X16
Duration 5 F64F4 32X16
Duration 6 F6958 32X16
N75 duty cycle 1 F7F44 16X16 actuator % factor 0.012207
N75 duty cycle 2 F8478 16X16
N75 duty cycle 3 F86BC 16X16
N75 duty cycle 4 F8900 16X16
BOOST MAP 1 F9394 16X16
BOOST MAP 2 F95D8 16X16
BOOST MAP 3 F981C 16x16
BOOST LIMITER F9A48 10x10
SVBL F9C60 1x1 this is the max value , there is a min value allso but it does not matter
N75 duty cycle 5 FA3DC 16x16
Rail pressure limiter 1 FC9D0 16x16
Rail pressure limiter 2 FCE64 16x16
SVRL FD18C 1x1
Max rail press setpoint FD1DC 8x12 by engine RPM and fuel temp
Abs rail press limiter FD448 8x12

hello again ,

does anyone know if in this ecu version are any SOI selector maps and duration selector maps ? ,
i did find 4 maps 6x1 just before first SOI map , looks like a selector but it's weird , x axis units are from -30 to 90 degrees celsius and the z units look like they are in percentage , i used factor 0.012207 like in the DW map and it goes from 48% up to 100% at 90degrees , no other information found on forums , if someone could enlighten me . Thanks

I allso started to do some modifications and first thing was Launch controll at 2500rpm with hard cut (AKA. popcorn rev limiter)

RaresCr wrote:hello again ,

does anyone know if in this ecu version are any SOI selector maps and duration selector maps ? ,
i did find 4 maps 6x1 just before first SOI map , looks like a selector but it's weird , x axis units are from -30 to 90 degrees celsius and the z units look like they are in percentage , i used factor 0.012207 like in the DW map and it goes from 48% up to 100% at 90degrees , no other information found on forums , if someone could enlighten me . Thanks

I allso started to do some modifications and first thing was Launch controll at 2500rpm with hard cut (AKA. popcorn rev limiter)

Closest i can get to your sw version. Pass pw ;]

Hello ,

can someone tell me which ones are the MAIN SOI and DURATION ?

kirukisu wrote:

RaresCr wrote:hello again ,

does anyone know if in this ecu version are any SOI selector maps and duration selector maps ? ,
i did find 4 maps 6x1 just before first SOI map , looks like a selector but it's weird , x axis units are from -30 to 90 degrees celsius and the z units look like they are in percentage , i used factor 0.012207 like in the DW map and it goes from 48% up to 100% at 90degrees , no other information found on forums , if someone could enlighten me . Thanks

I allso started to do some modifications and first thing was Launch controll at 2500rpm with hard cut (AKA. popcorn rev limiter)

Closest i can get to your sw version. Pass pw ;]

Hey Kirukisu,
can you PM me the password?

BR