MB Vito/Viano 2.2l w639 2004 detune or original

by **epdm** » Sun Feb 10, 2019 10:54 pm

Hello,

Have an automatic 2004 MB viano with the bullet proof 2.2d 150hp engine.

Sometimes when towing a heavy load or when even just cold and driving uphill in D it will go into limp home mode from time to time. The lhm usually goes away once the ignition is turned off and on again but sometimes the fault code needs to be erased aswell. The fault code is always the TPS ( turbo pressure sensor). The sensor itself has been replaced but didn't help. Its tuned from 150hp to 180hp ( 400nm) via an unknown programme, so pretty aggressively I would think, works great though.

Now I need the cross Europe with a heavy trailer again so I need the OE file or better still someone to slighly detune the current file to slighly lower the max turbo pressure so it won't go into limp home mode.

Will upload the current file if and when someone can help me.

Br.
Niko

by **jurebv** » Sun Feb 10, 2019 11:00 pm

Its not sensor problem its overboost problem...too much difference between actual and specified boost

by **epdm** » Sun Feb 10, 2019 11:32 pm

Yes, I am aware of this...therefore I am asking for the maximum boost to be lowered.

by **jurebv** » Sun Feb 10, 2019 11:36 pm

Lowering maximum boost and not hitting target boost are not the same fhing...post ur file and matching original

by **epdm** » Mon Feb 11, 2019 1:15 am

jurebv wrote:Lowering maximum boost and not hitting target boost are not the same fhing...post ur file and matching original

Aah...I'll post my file soon. Don't have an original though. Bought the minivan with the tune...

by **epdm** » Tue Feb 26, 2019 5:18 pm

ok here if the tuned file which was in the minibus.

Any help would be highly appreciated as I need to haul a heavy load for several k km in a few weeks.

by **jurebv** » Wed Feb 27, 2019 12:33 pm

ID your ecu with tool and post here HW / SW numbers... need a matching original to compare tune

by **epdm** » Wed Feb 27, 2019 2:11 pm

jurebv wrote:ID your ecu with tool and post here HW / SW numbers... need a matching original to compare tune

A 611 153 49 79 is the mb number

0 281 011 176 is the bosch number

hw. 43.02
Sw 40.02
fd 03m12

the intermitent fault code I am getting is p2359 Boost pressure: high pressure

also intermitent p2097 which is a dirty air filter, eventhough its brand new ?!