Chip Tuning Tools

Tools used for ECU reading and writing

Return to ECU Tuning Hardware

Re: Chip Tuning Tools

Postby ECUTools » Tue Mar 19, 2019 2:19 pm

➡❗I/O TERMINAL MULTI TOOL V 29❗⬅

⚡️ NEW LICENSE -❗ OPEL/GM EPS
Reading/writing of OPEL/GM EPS modules via CAN (OBD or wired on the bench).

Supported OPEL/GM EPS types:
- EPS BOSCH 70F3187+95080 70F3187 FLASH R/W 95080 EEPROM R/W. CAN (OBD).

User avatar
ECUTools
Custom Badge A
 
Posts: 325
Joined: Tue Nov 27, 2018 2:29 pm
Location: Estinoa

Re: Chip Tuning Tools

Postby ECUTools » Tue Mar 19, 2019 3:00 pm

➡❗BitBox Update❗⬅

⚡️ NEW MODULE - ❗ Kia/Hyundai Continental SIM2K-25x/26x
BSL reading and writing of Continental SIM2K-250/251/260 ECUs used in petrol Kia and Hyundai vehicles.

Continental SIM2K-250/251 TC1782 (FID: 150);
Siemens SIM2K-250/251 with MCU Infineon Tricore TC1782 with internal flash memory 2.5Mb;
Reading and writing of calibration area in BSL mode. ECU opening is required. Checksum and CVN correction.

Continental SIM2K-250/251 TC1767 (FID: 151) - under development;
✅Continental SIM2K-260 TC1791 (FID: 152) - under development;


❗Attention! BITS001 adapter required. Tested only with J2534 Tactrix Openport 2.0, DrewTech CarDAQ, Bosch VCM2.❗

User avatar
ECUTools
Custom Badge A
 
Posts: 325
Joined: Tue Nov 27, 2018 2:29 pm
Location: Estinoa

Re: Chip Tuning Tools

Postby ECUTools » Wed Mar 20, 2019 2:41 pm

➡❗Alientech K-Tag UPDATE: 2019 SUZUKI V-STROM DL650❗⬅

⭐K-Suite 3.32: 4 new K-TAG protocols:

Bike – Plugin 1127 – Mitsubishi 33920-28K51 – reading and writing
Boat – Plugin 1129 – Mitsubishi 33920-94L30 – reading and writing
Boat – Plugin 1130 – Mitsubishi 33920-89LD0 – reading and writing
Car – Plugin 1131 – Denso 275036-9160 – reading, writing and cloning
Car – Plugin 1126 – Denso 275036-6110 – reading, writing and cloning
Car – Plugin 1134 – Denso 275036-1910 – reading, writing and cloning
Car – Plugin 1133 – Delco E78 MPC5566 – reading, writing and cloning
Car – Plugin 1135 – Keihin 378220-5A2-xxx – reading, writing and cloning
Car – Plugin 1136 – Keihin 378220-R1A-xxx – reading, writing and cloning
Truck – Plugin 1128 – Delphi DCMI – reading, writing and cloning
Truck- Plugin 1132 – Siemens SID914 – reading, writing and cloning

⭐Find out more here.

User avatar
ECUTools
Custom Badge A
 
Posts: 325
Joined: Tue Nov 27, 2018 2:29 pm
Location: Estinoa

Re: Chip Tuning Tools

Postby ECUTools » Thu Mar 21, 2019 3:21 pm

➡❗Autotuner UPDATE❗⬅

Autotuner now supports:

Renault - Nissan - Opel - Dacia - Mercedes

Bosch EDC17C11, EDC17C42, EDC17CP19 & EDC17CP58⭐ – OBD reading, OBD witing;

✅On the following ECUs:

Bosch EDC17C11
Bosch EDC17C42
Bosch EDC17CP19
Bosch EDC17CP58

User avatar
ECUTools
Custom Badge A
 
Posts: 325
Joined: Tue Nov 27, 2018 2:29 pm
Location: Estinoa

Re: Chip Tuning Tools

Postby ECUTools » Fri Mar 22, 2019 11:03 am

➡❗FLEX release ver. 3.2.0.0 – OBD MEDC17 Mercedes❗⬅

⭐OBD MEDC17 Mercedes is now available!⭐

This OBD protocol has been improved since its first appearance in MAGPro2 x17 thanks to the advanced hardware of FLEX.

New Protocols added: find the list here.

Bugfixes:

- BMW Bosch MEVD17.2.6 OBD ENET: added to list
- Kia Continental SIM2K-341 BDM: fixed memories to correct ones
- MB Bosch EDC16CP31: added separate entry for version 8.30
- VAG Bosch EDC16U1-5.41 BDM: fixed memories to correct ones
- VAG Bosch MED9.1 BDM: fixed memories to correct ones
- VAG Bosch MED9.1.2 BDM: fixed problem with identification

✅Software Improvements:

- GUI: added Chinese language
- GUI: corrected Italian translation
- GUI: corrected Polish translation
- GUI: corrected some mistakes in the English text

User avatar
ECUTools
Custom Badge A
 
Posts: 325
Joined: Tue Nov 27, 2018 2:29 pm
Location: Estinoa

Re: Chip Tuning Tools

Postby ECUTools » Wed Mar 27, 2019 10:07 am

➡❗ Alientech K-Tag Tricore Service Mode: New supported ECUs!❗⬅

⭐Thanks to the latest K-Suite update, it will be possible to work on bench with K-Tag also on ECUs with microcontroller TC1724 without having to open them;

⭐Tricore Service Mode.
Remap the ECU on bench without having to open it: with K-TAG now you read and write the ECUs of Ducati, FCA, PSA, Renault, Suzuki and VAG directly through the connector!

⭐New ECUs supported by K-TAG with Tricore SM:

BOSCH ME17.5.24 IROM TC1724 VAG TSM
BOSCH ME17.5.26 IROM TC1724 VAG TSM
BOSCH ME17.9.21 IROM TC1724 DUCATI TSM
BOSCH ME17.9.23 IROM TC1724 RENAULT TSM
BOSCH ME17.9.64 IROM TC1724 SUZUKI TSM
BOSCH ME17.9.71 IROM TC1724 PSA TSM

User avatar
ECUTools
Custom Badge A
 
Posts: 325
Joined: Tue Nov 27, 2018 2:29 pm
Location: Estinoa

Re: Chip Tuning Tools

Postby ECUTools » Fri Mar 29, 2019 11:03 am

➡❗ Alientech KESSV2: BMW G-SERIES 2.0D AND 3.0D IN OBD2!❗⬅

⭐Thanks to the new K-Suite update, you’ll be able to work via OBD2 with ECUs of the BMW Gxx Series equipped with 2.0 and 3.0 diesel engines;

⭐All the Bosch MD1CP002 (DDE832C) and MD1CS001 (DDE802L) ECUs are now supported by Alientech KessV2 via OBD2 thanks to the new software update 3.34.

⭐You can find the list of the new BMW ECUs supported via OBD2 here.

User avatar
ECUTools
Custom Badge A
 
Posts: 325
Joined: Tue Nov 27, 2018 2:29 pm
Location: Estinoa

Re: Chip Tuning Tools

Postby ECUTools » Tue Apr 02, 2019 4:15 pm

➡❗Autotuner UPDATE❗⬅

Autotuner now supports:

VAG 1.6TDI

PCR2.1 Full read (backup + EEprom) ⭐ – bench reading (backup + EEprom), bench witing (backup + EEprom);

On the following ECUs:

Volkswagen 1.6 TDI - Continental PCR2.1
Audi 1.6 TDI - Continental PCR2.1
Seat 1.6 TDI - Continental PCR2.1
Skoda 1.6 TDI - Continental PCR2.1

User avatar
ECUTools
Custom Badge A
 
Posts: 325
Joined: Tue Nov 27, 2018 2:29 pm
Location: Estinoa

Re: Chip Tuning Tools

Postby ECUTools » Fri Apr 12, 2019 2:53 pm

➡❗FLEX ver 3.3.0.0 released – Solutions for EDC17CP50, MED17.9.7, MED17.7.7❗⬅

Mercedes MY2018/2019 (MED17.7.7), Jaguar & Land Rover with 2.0 Turbo engine (MED17.9.7) and Honda 2.2 turbo (EDC17CP50) are now supported!

⭐Thanks to FLEX’s Bench mode you can work directly from the connector of the control unit, without opening it in any case.

⭐Furthermore, now it is available in Helpdesk an automatic and free service to correct the CVN on BMW and VAG with Bosch Tricore ECU: an added feature to program in total safety those ECUs.

✅New Protocols added: find the list here

✅Bugfixes:

- License: fixed a wrong error message in case subscription was finished
- BMW Bosch MEDC17 OBD ENET: fixed an error which might happen while flashing maps (found on some EDC17C50 and EDC17C56)
- MB Bosch EDC17 OBD UDS: fixed an error which might happen while flashing maps (found on a ML250 with - --EDC17CP57) and on reading (found on EDC17C43 only)
- VAG Bosch MED9.5.10 BDM: fixed memories

✅Software Improvements:

- Generic: improved OBD protocols Kia Bosch EDC17C57
- Bench/Boot: added new checksum algo
- Renault Bosch EDC17C84 Bench/Boot: added new checksum algo (Nissan X-Trail)
- GUI: added translations for Manual viewer part
- GUI: completed German translation

✅New services by MMS Helpdesk:

- BMW Bosch MEDC17 CVN Fix: automatic CVN calculation added to Helpdesk: Service is free of charge and works with boot/bench contents.
- VAG Bosch MEDC17 CVN Fix: automatic CVN calculation added to Helpdesk. Service is free of charge and works with boot/bench contents.

User avatar
ECUTools
Custom Badge A
 
Posts: 325
Joined: Tue Nov 27, 2018 2:29 pm
Location: Estinoa

Re: Chip Tuning Tools

Postby ECUTools » Mon Apr 22, 2019 10:41 am

➡❗Autotuner UPDATE❗⬅

Autotuner now supports:

PSA 2.0 HDI - Peugeot 1.5 DCI - Renault 0.9 TCE & 1.2 TCE

Delphi DCM3.4 DCM3.5 & Continental EMS3150 ⭐ – OBD reading, OBD writing;

On the following vehicles:

Renault 1.5 DCI - Delphi DCM3.4
Dacia 1.5 DCI - Delphi DCM3.4
Nissan 1.5 DCI - Delphi DCM3.4
Citroen 2.0 HDI - Delphi DCM3.4
Peugeot 2.0 HDI - Delphi DCM3.4

Citroen 2.0 HDI - Delphi DCM3.5
DS 2.0 HDI - Delphi DCM3.5
Fiat 2.0 JTDM - Delphi DCM3.5
Peugeot 2.0 HDI - Delphi DCM3.5

Dacia 0.9 TCE - Continental EMS3150
Renault 0.9 TCE - Continental EMS3150
Dacia 1.2 TCE EU5 - Continental EMS3150
Renault 1.2 TCE EU5 - Continental EMS3150

User avatar
ECUTools
Custom Badge A
 
Posts: 325
Joined: Tue Nov 27, 2018 2:29 pm
Location: Estinoa

PreviousNext

Return to ECU Tuning Hardware

Who is online

Users browsing this forum: No registered users and 7 guests