Post by Kayhan 17# » Thu Mar 28, 2019 2:56 pm
Hey guys,

i need a solution for an Opel Corsa 1.0 ecotec.

DTCs:
P2145 EGR Sensor
P0401 EGR
P0130 O2 Sensor Bank 1 Sensor 1

i made an attempt in WinOLS and would need further help as im a beginner.

Using the Damos i found:
B04DC Codeword DAGR deactivation CD..=0
and
B04DD Codeword Diagnostic Position sensor deactivation CD..=0

then there is also
B2BA3 Codeword for AGR on/off 1x1 map
but i dont know if i should change that or not ass i think the first two should do it?

i changed those values to 0, is this already enough?

Now i also want to delete the errors and find the error path, when i search for P "0130" in -16bit and hex- i can find several entries (4 in total)

fe.
@00132
@1AFF4
@9D3DE
@A4574

so for me the Error is @A4574?
Error block starts at @A4500 / @A452E / @A454E / @A455C ??



however now i switch over to -8bit and decimal-
then press Strg+G -> @A4574 to go to the error
and check the area behind the error codes for the Error path values?



where do the error paths start?
@A4585? @A4590?

This is so far what i gathered from the tutorial from vagecumap which is probably totally different as its for edc16 and i have me7.6.2 ecu here?

If someone has a solution, i wouldnt say no but still want to start learning this =)