Good Morning,

I'm adjusting the VNT for my Car, EDC16C39, As you know VNT Settings are Starts with %75 Duty cycle at IDLE, I need them to start %85 or maybe %90 for the boost, I made the map, but when I datalog the car, It stays at %75. Why ?

I've also Set the "Inıtial Value for Control Signal" in PCR_CtlVAL_Calc, Am I missing something? I know that the map is not the "Regenerative" one. So Please help?

AlfaEmre wrote:Good Morning,

I'm adjusting the VNT for my Car, EDC16C39, As you know VNT Settings are Starts with %75 Duty cycle at IDLE, I need them to start %85 or maybe %90 for the boost, I made the map, but when I datalog the car, It stays at %75. Why ?

I've also Set the "Inıtial Value for Control Signal" in PCR_CtlVAL_Calc, Am I missing something? I know that the map is not the "Regenerative" one. So Please help?

post your ori, and map of your changes, then i can look at what you did or missed maybe.

this is my test file

AlfaEmre wrote:this is my test file

Ori and tuned one mate

Because the ECU is operating in closed loop and not open loop.