octivia vrs flat spot

Help and tips about fine tuning. Post your questions or how to in here.

octivia vrs flat spot

Postby Sierra boy » Fri May 03, 2019 8:53 pm

2008 vrs bmn enginge code

back story car has been remapped and had the dpf deleted. (not by me)

about 3 months after the remap, at 3k revs its developed a noticeable flat spot the about 3400 rpm it picks up again and starts boosting.

no fault codes

on live data on the snap on verus nomial boost requesting 2500m/bar, actual boost 2604m/bar at 2982 rpm

am i right to believe the car is over boosting and the ecu is backing the boost of as a safety precuation and that this is being casued by sticky vnts in the turbo ??

Sierra boy
New user
 
Posts: 10
Joined: Tue Oct 22, 2013 9:20 pm
Location: Belfast

Re: octivia vrs flat spot

Postby NRT » Sat May 04, 2019 8:09 am

Sierra boy wrote:2008 vrs bmn enginge code

back story car has been remapped and had the dpf deleted. (not by me)

about 3 months after the remap, at 3k revs its developed a noticeable flat spot the about 3400 rpm it picks up again and starts boosting.

no fault codes

on live data on the snap on verus nomial boost requesting 2500m/bar, actual boost 2604m/bar at 2982 rpm

am i right to believe the car is over boosting and the ecu is backing the boost of as a safety precuation and that this is being casued by sticky vnts in the turbo ??


Yes that could be happening, or it is just overboost without sticky vanes. it is a common cause for these engines to overboost, especially after its been tuned. i would say you could try by adjusting the N75 first and see if that helps, you adjust it based on your boost loggings

User avatar
NRT
Gold
 
Posts: 180
Joined: Wed Dec 14, 2016 6:06 pm
Location: Everywhere


Return to Fine Tuning, Testing, Diagnostics and Analysis

Who is online

Users browsing this forum: No registered users and 2 guests