Hi i'm new in ecu tuning and still learn about everythings, can somebody help me please to recognize the map, i'm already search for so many days and only find 1 map, it's driver wish at C10B6 (if i'm right) , and didn't find another map anymore, hope somebody here can make me learn better, thanks in advance.

Nb:i've already try to add the file and the system cannot allow me to do that, i don't know why, here is the note when i read the ecu
Hw: -
Sw: 1037523241
Vin nr: MNBUS4D10DW503xxx
Sw ver. : p382v8F4
Spare: -
Engine: -
Hw ver. : EDC16C7-7.30
Sw upg: -
Installation: -

It will help u,but first u need to post original file and car info ;)

Thanks for the reply @SSAutoP, i dont know why i cannot post the attachment, let me find the way to attach the ori file first :thumbup:

Finnaly this is the original map, please can somebody help me, thank you.. :angel:

SteelWolf wrote:Finnaly this is the original map, please can somebody help me, thank you.. :angel:

Yes,
-Driver's Wish :C10B6(16x16)
-Torque Limiter :CA2BE(25x1)
-EGR Map (Open percent) :C416E,C41D4(25x1) --> there are 2 maps
-Smoke map limited by fuel :CA5D2(25x1),CAD70(25x1),CA62E(20x1),CA68A(25x1),CA6CA(1x1),CA97A(16x16),E0D88(25x1)
-Duration : E1196(16x28)
-SOI : D7238(16x16),D75AC(16x16)
-VGT :E3816(16x21)
-Boost Map :E43FC(16x16),E4770(16x16)
-Boost Limiter(ATMOSPHERIC Pressure) :E571E(18x16)
-SVBL :E49B4(1x1)
-Rail :E802E(16x16)
-Rail Limiter :E93B6(16x8),E937E(1x1)

SSAutoP wrote:

SteelWolf wrote:Finnaly this is the original map, please can somebody help me, thank you.. :angel:

Yes,
-Driver's Wish :C10B6(16x16)
-Torque Limiter :CA2BE(25x1)
-EGR Map (Open percent) :C416E,C41D4(25x1) --> there are 2 maps
-Smoke map limited by fuel :CA5D2(25x1),CAD70(25x1),CA62E(20x1),CA68A(25x1),CA6CA(1x1),CA97A(16x16),E0D88(25x1)
-Duration : E1196(16x28)
-SOI : D7238(16x16),D75AC(16x16)
-VGT :E3816(16x21)
-Boost Map :E43FC(16x16),E4770(16x16)
-Boost Limiter(ATMOSPHERIC Pressure) :E571E(18x16)
-SVBL :E49B4(1x1)
-Rail :E802E(16x16)
-Rail Limiter :E93B6(16x8),E937E(1x1)

CAD70(25x1) is in the middle of another map... check again

wbr

SSAutoP wrote:

SteelWolf wrote:Finnaly this is the original map, please can somebody help me, thank you.. :angel:

Yes,
-Driver's Wish :C10B6(16x16)
-Torque Limiter :CA2BE(25x1)
-EGR Map (Open percent) :C416E,C41D4(25x1) --> there are 2 maps
-Smoke map limited by fuel :CA5D2(25x1),CAD70(25x1),CA62E(20x1),CA68A(25x1),CA6CA(1x1),CA97A(16x16),E0D88(25x1)
-Duration : E1196(16x28)
-SOI : D7238(16x16),D75AC(16x16)
-VGT :E3816(16x21)
-Boost Map :E43FC(16x16),E4770(16x16)
-Boost Limiter(ATMOSPHERIC Pressure) :E571E(18x16)
-SVBL :E49B4(1x1)
-Rail :E802E(16x16)
-Rail Limiter :E93B6(16x8),E937E(1x1)

Bravo, Thank you for your response, and give me a lot of details for the map, hope i can start to learn about remap from this guidance :clap: :clap: :thumbup:

Shooting wrote:

SSAutoP wrote:

SteelWolf wrote:Finnaly this is the original map, please can somebody help me, thank you.. :angel:

Yes,
-Driver's Wish :C10B6(16x16)
-Torque Limiter :CA2BE(25x1)
-EGR Map (Open percent) :C416E,C41D4(25x1) --> there are 2 maps
-Smoke map limited by fuel :CA5D2(25x1),CAD70(25x1),CA62E(20x1),CA68A(25x1),CA6CA(1x1),CA97A(16x16),E0D88(25x1)
-Duration : E1196(16x28)
-SOI : D7238(16x16),D75AC(16x16)
-VGT :E3816(16x21)
-Boost Map :E43FC(16x16),E4770(16x16)
-Boost Limiter(ATMOSPHERIC Pressure) :E571E(18x16)
-SVBL :E49B4(1x1)
-Rail :E802E(16x16)
-Rail Limiter :E93B6(16x8),E937E(1x1)

CAD70(25x1) is in the middle of another map... check again

wbr

Did you think this is not a map... ?

Shooting wrote:

SSAutoP wrote:

SteelWolf wrote:Finnaly this is the original map, please can somebody help me, thank you.. :angel:

CAD70(25x1) is in the middle of another map... check again

wbr

Did you think this is not a map... ?

No, there's a map at "$CABBE" 16x16 and this is in the middle of it, can't be correct, the others look ok tho

wbr

SteelWolf wrote:

SSAutoP wrote:

SteelWolf wrote:Finnaly this is the original map, please can somebody help me, thank you.. :angel:

Yes,
-Driver's Wish :C10B6(16x16)
-Torque Limiter :CA2BE(25x1)
-EGR Map (Open percent) :C416E,C41D4(25x1) --> there are 2 maps
-Smoke map limited by fuel :CA5D2(25x1),CAD70(25x1),CA62E(20x1),CA68A(25x1),CA6CA(1x1),CA97A(16x16),E0D88(25x1)
-Duration : E1196(16x28)
-SOI : D7238(16x16),D75AC(16x16)
-VGT :E3816(16x21)
-Boost Map :E43FC(16x16),E4770(16x16)
-Boost Limiter(ATMOSPHERIC Pressure) :E571E(18x16)
-SVBL :E49B4(1x1)
-Rail :E802E(16x16)
-Rail Limiter :E93B6(16x8),E937E(1x1)

Bravo, Thank you for your response, and give me a lot of details for the map, hope i can start to learn about remap from this guidance :clap: :clap: :thumbup:

Your welcome!
If u still have more question u can contact me ;)
Enjoy!