SmokeLimiter issue

by **WOBBLER** » Sat May 18, 2019 8:21 pm

Hello i hope somebody could help me.

I had remapped the EDC15+ from my Car :twisted: and i got there a Problem.

My IQ is Limited by MAF but i dont know why, because i has changed the SmokeLimiter MAP.
As a sample in my SLMap stands by 1150mg air he can inject 67mg from 1400 to 5355rpm
but by the LOG with VCDS says IQ via MAF only 57,9 but he gets 1195mg of AIR.

I work with VAGEDCsuite only on Codeblock 3 because its an 4motion.

In the File is a Log the tuned and original file.

In the log at Timestamp 135,79 is the Problem.
I am thankful for every help! :angel:

by **WOBBLER** » Sun May 19, 2019 7:39 pm

Nobody an idea?

by **NRT** » Mon May 20, 2019 9:00 am

WOBBLER wrote:Hello i hope somebody could help me.

I had remapped the EDC15+ from my Car :twisted: and i got there a Problem.

My IQ is Limited by MAF but i dont know why, because i has changed the SmokeLimiter MAP.
As a sample in my SLMap stands by 1150mg air he can inject 67mg from 1400 to 5355rpm
but by the LOG with VCDS says IQ via MAF only 57,9 but he gets 1195mg of AIR.

I work with VAGEDCsuite only on Codeblock 3 because its an 4motion.

In the File is a Log the tuned and original file.

In the log at Timestamp 135,79 is the Problem.
I am thankful for every help! :angel:

I havent checked your file, but have you tried tuning al 3 codeblocks? ive experienced almost similar issue before on an EDC15 auto, whereby some maps where limited by the other code blocks, so the problem was resolved by tuning all of the blocks.

by **WOBBLER** » Mon May 20, 2019 12:19 pm

Thank you im trying this :angel:

by **WOBBLER** » Thu May 23, 2019 9:02 am

I had changed now all maps but its still limited at 57,9mg :cry:
Does somebody has an another idea? :)

by **NRT** » Sun May 26, 2019 12:08 pm

WOBBLER wrote:I had changed now all maps but its still limited at 57,9mg :cry:
Does somebody has an another idea? :)

Mate, these two files are not the same software and ecu numbers. need to make sure you tune your original one. try again and then i will rate it.

by **WOBBLER** » Mon Jun 03, 2019 8:14 am

I had found the Problem i had build it in by myself in the Smoke Limiter.

These Files where identical. Do you mean because the codeblocks have different numbers ?
That happened with the vagedcsuite as I adjusted the injector duration to the new injectors
then he suddenly switched from 58882 to 44031.

The software works anyway.
I know should it make a new file clean and correct :)

But thanks so much for taking the time :)