Finding a great tool Eprom programmer help

by **user202** » Wed Jun 05, 2019 1:47 pm

Hi Forum-mates,

I would like to buy an EPROM / Flash programmer.

Do you have any experiences about

Tl866ii Minipro
GQ4x4
Revelprog IS
G540 Programmer

My aims are immo off EPROMs and FLASH repair /1.9 TDi soldering chips (flashes)

29F400BT / 93C56 / 5P08C3 /28F512 / 290F10 and so on

Could you advise me which is good for it? Or something other bran

I’m thinking about Minipro Tl866ii but I read many comments to not working.
What’s your opinion / expericence?

5p08C3 Eprom is important fro EDC15C2 immo off.

Thanks! :)

by **Shooting** » Wed Jun 05, 2019 7:52 pm

user202 wrote:Hi Forum-mates,

I would like to buy an EPROM / Flash programmer.

Do you have any experiences about

Tl866ii Minipro
GQ4x4
Revelprog IS
G540 Programmer

My aims are immo off EPROMs and FLASH repair /1.9 TDi soldering chips (flashes)

29F400BT / 93C56 / 5P08C3 /28F512 / 290F10 and so on

Could you advise me which is good for it? Or something other bran

I’m thinking about Minipro Tl866ii but I read many comments to not working.
What’s your opinion / expericence?

5p08C3 Eprom is important fro EDC15C2 immo off.

Thanks! :)

MiniPro TL866A is perfect for this job, I use mine daily
For 5P08C3 you need X-Prog, and read as 95C08

wbr

by **user202** » Thu Jun 06, 2019 11:23 am

Shooting wrote:
MiniPro TL866A is perfect for this job, I use mine daily
For 5P08C3 you need X-Prog, and read as 95C08

wbr

I read that at forums that there is a possibility to read 5p08c3 with minipro a tricky way to read as 95080 and write as 95040 do you try this? :O
What do you think about ebay PSOP44 adapters and Soic adapters ?

Thank you for your advise, appreciated! :)

by **Shooting** » Thu Jun 06, 2019 11:35 am

user202 wrote:
Shooting wrote:
MiniPro TL866A is perfect for this job, I use mine daily
For 5P08C3 you need X-Prog, and read as 95C08

wbr

I read that at forums that there is a possibility to read 5p08c3 with minipro a tricky way to read as 95080 and write as 95040 do you try this? :O
What do you think about ebay PSOP44 adapters and Soic adapters ?

Thank you for your advise, appreciated! :)

It doesn't work, I tried once and trashed an Immo, I then fixed it with X-Prog.
Cheap Chinese adapters are ok if you re-work them with new solder

wbr

by **54diag** » Fri Jun 07, 2019 5:01 pm

Minipro and VVDI Prog - this is good set for immo.

by **user202** » Mon Jun 17, 2019 1:41 pm

I ordered GQ4x4 finally I found a sale and I will try it and riport it what are the experiences about. :D

by **user202** » Mon Jul 22, 2019 8:28 pm

user202 wrote:I ordered GQ4x4 finally I found a sale and I will try it and riport it what are the experiences about. :D

I got the programmer and tried.
It is very good and simple I advise anybody because it reads and writes many many eproms flashes....
For me it's good enough :) Worth to buying. ;)