No checksum - MPPS v13

by **megapage** » Sat Jun 08, 2019 6:41 pm

Hi,
i have problem with my car... In MPPS v13 I have no checksum in original .bin file and mod .bin file (after disabling dpf). I can not upload nothing in MPPS without checksum... :crazy:

Plz help!

I am sending attachments below.

Leo

by **Shooting** » Sat Jun 08, 2019 7:22 pm

megapage wrote:Hi,
i have problem with my car... In MPPS v13 I have no checksum in original .bin file and mod .bin file (after disabling dpf). I can not upload nothing in MPPS without checksum... :crazy:

Plz help!

I am sending attachments below.

Leo

Here is checksum fixed, now post in INTRODUCE YOURSELF too...

wbr

by **megapage** » Sat Jun 08, 2019 9:05 pm

MPPS still don't see checksum ("no checksum") on the file from You. :( :( :( :(

by **megapage** » Sat Jun 08, 2019 9:34 pm

Shooting wrote:
megapage wrote:
Here is checksum fixed, now post in INTRODUCE YOURSELF too...

wbr

You don't need oryginal file with checksum? I'm asking because both of my files did not have a checksum - at least this is indicated by mpps v13.

by **Shooting** » Sun Jun 09, 2019 9:26 am

megapage wrote:
Shooting wrote:
megapage wrote:
Here is checksum fixed, now post in INTRODUCE YOURSELF too...

wbr

You don't need oryginal file with checksum? I'm asking because both of my files did not have a checksum - at least this is indicated by mpps v13.

Yes we need original, but checksums are fixed now... your file has strange bits edited outside of the map area, this is why it isn't working.
Here is Original for your car, I suggest you start again.

wbr

by **Rbnb** » Sun Jun 09, 2019 9:26 am

mpps dont calculate checksum by itself like kess , you have to give it already calculated.

by **megapage** » Mon Jun 10, 2019 9:37 pm

Shooting wrote:
Yes we need original, but checksums are fixed now... your file has strange bits edited outside of the map area, this is why it isn't working.
Here is Original for your car, I suggest you start again.

Nop.... still no checksum found on origin file from You. :x :x :x

I wonder if this is due to the fact that I connect via the ECU from the 3.0 TDI (vide screen). My guess is that the controler (computer) was swapped to my 2.0 TDI, but I read .BIN from it, so It should write it down (?).

Summa summarum, I can not connect to the car by any other driver available for the MPPS V13, than the one for the 3.0 TDI, who does not see checksumm on any of my files, or those from you.

Any suggestions?

by **megapage** » Mon Jun 10, 2019 9:39 pm

Shooting wrote:
Yes we need original, but checksums are fixed now... your file has strange bits edited outside of the map area, this is why it isn't working.
Here is Original for your car, I suggest you start again.

Nop.... still no checksum found on origin file from You. :x :x :x

I wonder if this is due to the fact that I connect via the ECU from the 3.0 TDI (vide screen). My guess is that the controler (computer) was swapped to my 2.0 TDI, but I read .BIN from it, so It should write it down (?).

Summa summarum, I can not connect to the car by any other driver available for the MPPS V13, than the one for the 3.0 TDI, who does not see checksumm on any of my files, or those from you.

Any suggestions?

by **megapage** » Mon Jun 10, 2019 9:43 pm

Rbnb wrote:mpps dont calculate checksum by itself like kess , you have to give it already calculated.

you're wrong. MPPS v13 displays that it recalculates at some ECUs, but not in EDC 17 :cry:

by **Lambda1** » Mon Jun 10, 2019 10:48 pm

Long story short... put your file you want to flash an we will chks it.
For EDC17 normally i would prefer to let tool done it but its possible to do by WinOls...also.