Hello, I have tuned my car pretty much. I came to point when the original MAF isnt enought and also learned that its reads pretty bad (possibly need new one).

The car is BKD engined Seat leon with EDC16U1 03G906016AJ 7341 version.
Can somebody help me with switching to MAP sensor smoke limiting? So i can pass hourly kg/h MAF limit?

This is my original unmodified file :

Hello, you need to find a switch, every edc16 has a different location, you have to use the damos. Find sequence, 000 001 002:037 001 000:000 001 000, this 001 - switch.

Can you be more specific. I cant search sequence where " : " is in between. Did you mean to search 3 sequences which you separated by " : " ?

I tried to find 037 001 000. but nothing in whole file

The way i was doing this until now was by aligning file with damos from A3 to my file. Once i saw there are not many changes and lines in 2d were nicely alligned i transfered maps. As you can see on picture it perfectly alligns only few switche are diffenrent.
https://imgur.com/7voJXVj
I found this way the switch. But whenewer i turn it on car goes crazy. It limits NM to 80nm idle and at 2500 rpm in Neutral goes to 100Nm according to Means block 8 via vcds. ITs totaly undrivable because it injects max 15mg/stroke.

ANd yes i inported proper smoke limit by MAP map.

So my only guess is that its wrong switch