EDC16u1 problem, please help

Posts related to specific vehicles, or any other general tuning info.

Return to General tuning

EDC16u1 problem, please help

Postby v0221 » Tue Oct 15, 2019 6:41 am

Hy guys,

Please help me, i made a huge mistake today. I tried to switch off the EGR in my friend's Touran 2.0pd DSG 2004 bkd, and when i was moving near the car, i kicked my laptop up while it was writing. The Ksuite told me that there was an error occured during the writing. :( Unfortunately, i did not make BDM backup... How stupid i am...

- Recovery with Kess doesnot work.
- Then I opened the ECU and read the proc, flash, eeprom separately. Flash was full of 0s, e2prom was also corrupt.
- I found some similar bdm files from Touran 2.0pd dsg, and tried to write it back with immo off, but car still doesnot start.

Do you have any idea, or full original BDM backup to recover or clone that ECU? Should I looking for a similiar HW/SW ECU, and switch off the immo in it?

I have attached my files. The first folder there is an Ori (OBD read) and the modified file what i wanted to write back. The second folder the BDM "backup" after the accident, and a third one is what i wanted to clone to my ECU with immo off.

//EDIT: The transmission signs (PDNR) are consantly flashing on the board, when i switch on the dashboard. It was not before.

HW: 0281011844
SW: 1037372498
VIN nr.: WVGZZZ1TZ4W166611
SW ver.:
Spare:
Engine: R4 2,0L EDC
HW Ver.:
SW upg.: 03G906016HK 7000

Please help me! :( :( :(
You do not have permissions to view the files yet. You have to be registered and you have to make at least 3 quality / unique posts.

v0221
New user
 
Posts: 4
Joined: Tue Oct 15, 2019 6:32 am
Location: Hungary

Re: EDC16u1 problem, please help

Postby haxooor » Tue Oct 15, 2019 11:37 am

pdnr blinks because ecu was lost connection with it .. your only opinion is to find full bdm hw sw, i think ..

haxooor
New user
 
Posts: 7
Joined: Sat Jan 16, 2016 8:28 pm
Location: eeprom

Re: EDC16u1 problem, please help

Postby v0221 » Tue Oct 15, 2019 12:50 pm

haxooor wrote:pdnr blinks because ecu was lost connection with it .. your only opinion is to find full bdm hw sw, i think ..


Do you any suggestions, how can i get full bdm content for this ECU? As far as i know, this is a rare ECU, and i can't find a similar one so far. :(

v0221
New user
 
Posts: 4
Joined: Tue Oct 15, 2019 6:32 am
Location: Hungary

Re: EDC16u1 problem, please help

Postby haxooor » Tue Oct 15, 2019 2:01 pm

v0221 wrote:
haxooor wrote:pdnr blinks because ecu was lost connection with it .. your only opinion is to find full bdm hw sw, i think ..


Do you any suggestions, how can i get full bdm content for this ECU? As far as i know, this is a rare ECU, and i can't find a similar one so far. :(


hmm, for start you must post this thread into the right category .. you have category here for bricked ecus..and its not a rare ecu, whole vag use it

haxooor
New user
 
Posts: 7
Joined: Sat Jan 16, 2016 8:28 pm
Location: eeprom


Return to General tuning

Who is online

Users browsing this forum: No registered users and 10 guests