Peugeot 307 1.6 hdi 90 Edc16c34 SW 380727

by **casianoros** » Thu Nov 14, 2019 4:55 pm

Hi there guys,
I am working on my Peugeot 307 1.6 Hdi with edc16c34 ecu it has 90 hp and I was searching for the maps, here are the maps i have found i have created a mappack(kp) file for you guys to load on the project.

The problem i am confrunting si that I cannot find the Torque Limit Map.
Could someone help me with the location ?
If you guys know are the selected maps that I have found correct ?

Thanks in advance.
I am going to make a stage 1 for this car with a safe smoke free remap :-D and I do need some of the maps to do this :-D and I will post it in the forum for others to learn :-D :thumbup: :thumbup:

by **Shooting** » Thu Nov 14, 2019 8:21 pm

casianoros wrote:Hi there guys,
I am working on my Peugeot 307 1.6 Hdi with edc16c34 ecu it has 90 hp and I was searching for the maps, here are the maps i have found i have created a mappack(kp) file for you guys to load on the project.

The problem i am confrunting si that I cannot find the Torque Limit Map.
Could someone help me with the location ?
If you guys know are the selected maps that I have found correct ?

Thanks in advance.
I am going to make a stage 1 for this car with a safe smoke free remap :-D and I do need some of the maps to do this :-D and I will post it in the forum for others to learn :-D :thumbup: :thumbup:

This might help, you'll need to check they are correct

wbr

Code: Select all: Address;Name;Size "$00000";"Hexdump";"" "$1C1664";"Driver Wish 1";"10x16" "$1C18AA";"Driver Wish 2";"11x16" "$1C1AEC";"Driver Wish 3";"10x16" "$1C2BFA";"Injection Duration (Nesigur)";"16x16" "$1C402A";"Smoke Map - iq on NM";"16x16" "$1CCD5A";"NM to IQ 2";"16x16" "$1CCF9E";"NM to IQ 3";"16x16" "$1CD1E2";"NM to IQ 4";"16x16" "$1CD426";"NM to IQ 5";"16x16" "$1E547A";"Injection Duration ( RailPressure, mm3 )";"24x16" "$1E57CE";"Injection Duration ( RailPressure, mm3 )";"24x16" "$1E5B22";"Injection Duration ( RailPressure, mm3 )";"24x16" "$1E5E76";"Injection Duration ( RailPressure, mm3 )";"24x16" "$1E61C2";"Injection Duration ( RailPressure, mm3 )";"20x16" "$1E6496";"Injection Duration ( RailPressure, mm3 )";"24x16" "$1EACA8";"Boost Map nm";"16x16" "$1EAEEC";"Boost Map nm 2";"16x16" "$1EB130";"Boost Map iq ";"16x16" "$1EB374";"Boost Map IDK";"16x16" "$1EB5B8";"Boost Map IDK";"16x16" "$1EB7FC";"Smoke Map - Air Injection Stroke";"16x16" "$1EB7FC";"Smoke Map - Air Injection Stroke 2";"16x16" "$1EBA40";"Boost Map IDK";"16x16" "$1F0AEC";"Fuel Rail Pressure 2";"16x16" "$1F08A8";"Fuel Rail Pressure 1";"16x16" "$1F0D30";"Fuel Rail Pressure 3";"16x16" "$1F0F74";"Fuel Rail Pressure 4";"16x16" "$1F11CE";"Fuel Rail Pressure 5";"15x16" "$1C3716";"EGR";"16x16" "$1C497A";"Hysteresis";"12x1" "$1C49AC";"Hysteresis";"12x1" "$1CB7D4";"MAX Torque Limiter";"16x1" "$1CB712";"Torque Limiter";"19x1" "$1C1F04";"Drivers Wish 5";"10x16" "$1C214A";"Drivers Wish 6";"11x16" "$1C1E14";"Drivers Wish 4";"9x9" "$1CCB16";"NM to IQ 1";"16x16"

by **casianoros** » Mon Nov 18, 2019 11:14 am

Thanks a lot,
I will look over them tonight :clap: :thumbup: :thumbup: :D

by **casianoros** » Mon Nov 18, 2019 8:35 pm

I have made a stage 1 remap,
Using 2400mbar with around 61-65 mm3 taht would be 850mg of air / stroke and with an afr of 16, the remap does not work I tried it today, maybe is crap cuz it's the firest time that I make edc16's :-(
If you guys would like to see it I will attach a file with the first remap and the Mappack maybe will be helpfull for other people :thumbup:

I do need to say that my maf is gone so maybe that's why the air is not calculated correctly while driving and the remap does not work I had this issue with my old 406 :think:

by **casianoros** » Tue Nov 19, 2019 10:54 am

Hy guys,

I-m back I did a rework on my remap named it stage 2 and increased a little bit the rail pressure and duration, also the driver wish now the car works much better I do have a little smoke to be honest but not much i can feel the torque, I do have a couple of issues I would like to set the rev limiter on the Torque Limiter map but on the X-Axis it shows 1,2,3,4 and if i switch the source of x-axis it shows a constant value without showing 1200rpm , 1500rpm and so forth .. What could be the problem ? (photo uploaded)

TQLimit.PNG

Fixes:
I have fixed the Drive Wish with the correct factor on x-axis 0.012207 and now it shows correct percentage until 100% (photo uploaded)

Driver Wish.PNG

Troubles:

1. Ah And I could-t fint the SVBL( Single Value Boost Limiter ) :cry: I have tried searching for 2350 but it did not work like on Vag cars mabe because its a 1.6 and it is PSA ( That is what I think )
2.At position 1eba40 (Boost map IDK (I dont know)) - I do assume that this map is Boost Limit ON atmosferic pressure and Rpm, do someone know a correct factor for the X-Axis ? or em I correct is this the Boost limit on atmos pressure ? (photo uploaded)

Boost Atmos Limit.PNG

3.Using the Boost Map at the position 1eb374 ( I assume that x-Axis is mg/air stroke ) is my assumtion correct ? adn if it is is there a correct factor that I could use in order to see the correct value ? (Photo uploaded)

Boost Map Factor.PNG

I have attached the stage 2 also if some of you would like to see it or to use parts of it, i do guess it's fine tested on car with a error on my MAF but works fine, ill come with a result after changing my maf with a new one :thumbup:

by **casianoros** » Wed Nov 20, 2019 12:32 pm

Hi guys I-m back with some new updates I have read some topics about edc16 svbl( Single Value Boost Limiter ) :thumbup:

And found it on my ecu here is the adress maybe it will be helpfull for some people 1EBC40 , as I had read the svbl is the las value after all the boost maps. :-D

here is the example:

Svbl Location.PNG

by **gesch** » Fri Jan 15, 2021 10:25 am

Shooting wrote:
casianoros wrote:Hi there guys,
I am working on my Peugeot 307 1.6 Hdi with edc16c34 ecu it has 90 hp and I was searching for the maps, here are the maps i have found i have created a mappack(kp) file for you guys to load on the project.

The problem i am confrunting si that I cannot find the Torque Limit Map.
Could someone help me with the location ?
If you guys know are the selected maps that I have found correct ?

Thanks in advance.
I am going to make a stage 1 for this car with a safe smoke free remap :-D and I do need some of the maps to do this :-D and I will post it in the forum for others to learn :-D :thumbup: :thumbup:

This might help, you'll need to check they are correct

wbr

Code: Select all
Address;Name;Size "$00000";"Hexdump";"" "$1C1664";"Driver Wish 1";"10x16" "$1C18AA";"Driver Wish 2";"11x16" "$1C1AEC";"Driver Wish 3";"10x16" "$1C2BFA";"Injection Duration (Nesigur)";"16x16" "$1C402A";"Smoke Map - iq on NM";"16x16" "$1CCD5A";"NM to IQ 2";"16x16" "$1CCF9E";"NM to IQ 3";"16x16" "$1CD1E2";"NM to IQ 4";"16x16" "$1CD426";"NM to IQ 5";"16x16" "$1E547A";"Injection Duration ( RailPressure, mm3 )";"24x16" "$1E57CE";"Injection Duration ( RailPressure, mm3 )";"24x16" "$1E5B22";"Injection Duration ( RailPressure, mm3 )";"24x16" "$1E5E76";"Injection Duration ( RailPressure, mm3 )";"24x16" "$1E61C2";"Injection Duration ( RailPressure, mm3 )";"20x16" "$1E6496";"Injection Duration ( RailPressure, mm3 )";"24x16" "$1EACA8";"Boost Map nm";"16x16" "$1EAEEC";"Boost Map nm 2";"16x16" "$1EB130";"Boost Map iq ";"16x16" "$1EB374";"Boost Map IDK";"16x16" "$1EB5B8";"Boost Map IDK";"16x16" "$1EB7FC";"Smoke Map - Air Injection Stroke";"16x16" "$1EB7FC";"Smoke Map - Air Injection Stroke 2";"16x16" "$1EBA40";"Boost Map IDK";"16x16" "$1F0AEC";"Fuel Rail Pressure 2";"16x16" "$1F08A8";"Fuel Rail Pressure 1";"16x16" "$1F0D30";"Fuel Rail Pressure 3";"16x16" "$1F0F74";"Fuel Rail Pressure 4";"16x16" "$1F11CE";"Fuel Rail Pressure 5";"15x16" "$1C3716";"EGR";"16x16" "$1C497A";"Hysteresis";"12x1" "$1C49AC";"Hysteresis";"12x1" "$1CB7D4";"MAX Torque Limiter";"16x1" "$1CB712";"Torque Limiter";"19x1" "$1C1F04";"Drivers Wish 5";"10x16" "$1C214A";"Drivers Wish 6";"11x16" "$1C1E14";"Drivers Wish 4";"9x9" "$1CCB16";"NM to IQ 1";"16x16"