GLK 220 CDI 2014

Help and tips about your tune, post your work in here.

Return to Rate My Tune

GLK 220 CDI 2014

Postby Mapper69 » Thu Jan 30, 2020 1:44 pm

Hey guys :)

after flashing we drove about 20 minutes without an issue everything was okay..next day it started...
i got a strange DTC sometimes it appears and sometimes not..

P062B -fuel injector internal control unit control power

and car goes in limp mode, you can delete the code, and then it works sometimes for 2 minutes sometimes for 20 minutes, not related to cold/warm engine and how much you kick it down

My tuner means that its a hardware fault, so i went to a friend of mine to read it out a again.

(with the ORI file everything was OK)

Would be awesome when somebody could help me to find the failure :)

Thx :)
You do not have permissions to view the files yet. You have to be registered and you have to make at least 3 quality / unique posts.

Mapper69
New user
 
Posts: 3
Joined: Sat Nov 02, 2019 6:34 pm
Location: Germany

Re: GLK 220 CDI 2014

Postby adriancl » Thu Jan 30, 2020 5:10 pm

write back original file and see if you'll get again fault code.If not, is bad sw, is have fault code, is Hw issue.
Anyway, you must post also original file.

User avatar
adriancl
Diamond
 
Posts: 767
Joined: Mon Oct 08, 2012 7:39 pm
Location: Romania

Re: GLK 220 CDI 2014

Postby Mapper69 » Fri Jan 31, 2020 6:27 pm

Thank you! i tried with ori now, everything works fine..

i attached the ori file

THANK you very much for your help!
You do not have permissions to view the files yet. You have to be registered and you have to make at least 3 quality / unique posts.

Mapper69
New user
 
Posts: 3
Joined: Sat Nov 02, 2019 6:34 pm
Location: Germany


Return to Rate My Tune

Who is online

Users browsing this forum: No registered users and 6 guests