Hi Folks,
This is my first major tune that I am attempting, and there are a lot of areas/maps untouched or unfinished, currently working on the Injection maps. Please don't criticize the Amount of Mg/st, rather if the extrapolation to achieve them is correct. 37.5* DOI was chosen as I read that past this can cause high EGTs, and 28* SOI because past this the (stock) injectors can't create the injection pressure needed, again I am very new and learning. The main area I am struggling with is the Operating Temp SOI map, below 1250RPM is untouched FYI. Any advice would be greatly appreciated. I intend this to run with 1.8/85bar of boost at peak.

I am using VAGEDC15P+Suite.
No Original map, car was bought tuned.

Melett PD150 Turbo
Front Mount Intercooler
Turbo Back straight pipe
PD150 Headbolts

Cammo

Hi im new on this too, around a year studying and apllying on my own cars.
I look at your file and i think you have to mutch in some areas, torque, smoke, and durations.
I have an Asz with a VB 1752 and already achieve 1.8/1.9 bar tested on VCDS.
Now im doing something like 1.820peak and 1.750 constant, no smoke.
You can use PD160 Ori file to see how they did it, compare with your ORI and start from there.