Hi, I'm working on a EDC16C3 from a Ford 1.6TDCi and I'm having some trouble with finding the right start adress of the DTC tables and switches path.

I think the DTC P Code start at 0C46C2
And the switches start at 0C4DFC

Can somebody confirm that and explain to me if there is any "trick" or a way to know the start of the tables in EDC16 ecus?
I've managed to find them in a Mercedes EDC16C2 and it was easier because I can clearly see the start of the P-codes table and MB-especific codes as they are clearly different in 2D mode and "isolated" but in this I'm completely lost...

Thanks in advance

I think you found it right

Hi, thanks for your reply but I can't open your file in my winols (I've older version) can you send me a screenshot of the mappack?

So if I were right in the begining I assume that it is more less this:

-DTC P-Codes Table (4x187) start at C46C2
-DTC Switches (1x187) start at C4DFC

I assumed the 187 leght based on the switches path but with the 4x187 on the P-Codes the last two lines doesn't make sense.

So the manufacter codes should be before the P-Codes? Or am I doing something wrong?

I will wait for your screenshot to have a second opinion and to see if I'm tinking right ;)

all right, only the dimensions 4x185 and 1x185

Already tested a forced dtc to see if the path was right and its was.

Thanks for your help ;)